Subject: RE: [linux-audio-dev] [ann] unmatched - a LADSPA amp tone
From: Mark Knecht (mknecht_AT_controlnet.com)
Date: Thu Oct 24 2002 - 19:27:14 EEST
Hi,
I haven't followed this thread all the way through, but it looks like
you're all having an interesting time on an interesting subject.
I record mostly through a Pod Pro these days. I've set up a number of my
own amp models. Having used the device for about a year, I'll point out that
(for me anyway) the most interesting changes come from changing the speaker
box part of the equation. A Hi-Watt sounds very different through a closed
single 10" speaker vs. a 4x12 box.
If the scope traces are from a microphone you on the right track. If
they're not, well then you're probably modeling only part of the system.
Mark
-----Original Message-----
From: linux-audio-dev-admin_AT_music.columbia.edu
[mailto:linux-audio-dev-admin_AT_music.columbia.edu]On Behalf Of Paul
Winkler
Sent: Thursday, October 24, 2002 8:24 AM
To: linux-audio-dev_AT_music.columbia.edu
Cc: Paul Winkler
Subject: Re: [linux-audio-dev] [ann] unmatched - a LADSPA amp tone
On Thu, Oct 24, 2002 at 08:41:36AM +0100, Steve Harris wrote:
> Looking at the scope traces from that guys site (which I will read later
> today), there is some fairly serious HP filtering going on sometime after
> one of the amp stages.
Output transformer? Certainly they don't have infinite response...
It's not clear to me where and how those scope shots were taken.
--Paul Winkler http://www.slinkp.com "Welcome to Muppet Labs, where the future is made - today!"
This archive was generated by hypermail 2b28 : Thu Oct 24 2002 - 19:40:43 EEST