[linux-audio-dev] problems with Midisport 2x2

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: [linux-audio-dev] problems with Midisport 2x2
From: Ivica Bukvic (ico_AT_fuse.net)
Date: Mon Feb 24 2003 - 22:59:14 EET


Hi all,

I've got a small problem with my Midisport 2x2 MIDI interface. While it worked
ok before, now for some odd reason I cannot get it to open for MIDI output
(from the computer). I've checked the /var/log/messages and this is what I
got:

Feb 24 20:44:41 mycomp kernel: hub.c: USB new device connect on bus2/1,
assigned device number 2
Feb 24 20:44:41 mycomp kernel: usb.c: USB device 2 (vend/prod 0x763/0x1001) is
not claimed by any active driver.
Feb 24 20:44:44 mycomp /etc/hotplug/usb.agent: Setup ezusbmidi for USB product
763/1001/1
Feb 24 20:44:44 mycomp /etc/hotplug/usb.agent: Module setup ezusbmidi for USB
product 763/1001/1
Feb 24 20:44:44 mycomp /etc/hotplug/usb/ezusbmidi: load
/usr/share/usb/ezusbmidi/ezusbmidi2x2.ihx for 763/1001/1 to
/proc/bus/usb/002/002
Feb 24 20:44:44 mycomp kernel: usb-uhci.c: interrupt, status 2, frame# 1645
Feb 24 20:44:44 mycomp kernel: usb.c: USB disconnect on device 2
Feb 24 20:44:44 mycomp kernel: hub.c: USB new device connect on bus2/1,
assigned device number 3
Feb 24 20:44:44 mycomp kernel: usb.c: USB device 3 (vend/prod 0x763/0x1110) is
not claimed by any active driver.
Feb 24 20:44:48 mycomp /etc/hotplug/usb.agent: Setup snd-usb-audio audio usb
usb-midi for USB product 763/1110/1
Feb 24 20:44:48 mycomp kernel: usb.c: registered new driver snd-usb-audio
Feb 24 20:44:48 mycomp kernel: snd-usb-midi: MIDIStreaming version 01.00
Feb 24 20:44:48 mycomp kernel: snd-usb-midi: EP 01: 2 jack(s)
Feb 24 20:44:48 mycomp kernel: snd-usb-midi: EP 81: 2 jack(s)
Feb 24 20:44:48 mycomp kernel: snd-usb-midi: created 0 output and 4 input
ports
Feb 24 20:44:48 mycomp kernel: usb-uhci.c: ENXIO c0008380, flags 0, urb
cdc59d60, burb cdc59ce0
Feb 24 20:44:48 mycomp kernel: snd-usb-midi: usb_submit_urb: -6
Feb 24 20:44:48 mycomp /etc/hotplug/usb.agent: ... blacklisted module: audio
Feb 24 20:44:48 mycomp kernel: usb.c: registered new driver midi
Feb 24 20:44:48 mycomp /etc/hotplug/usb.agent: ... blacklisted module:
usb-midi

It says that the device was opened with 4 input and 0 output ports. Why is
this the case? I have no problem getting the midi input going, but my output
is mysteriously dead.

I've read somewhere that if the device is reconnected that the output stops
working (might have been CCRMA's Fernando), but this is the log from the
initial connect as soon as the computer boots.

I've also made sure that no MIDI devices were connected to the MIDISPORT upon
starting up.

Any help on this issue is greatly appreciated! Sincerely,

Ico


New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Tue Feb 25 2003 - 04:33:43 EET