Re: [linux-audio-dev] EMI26 (was: Welcome to the "linux-audio-dev" mailing list)

From: Clemens Ladisch <clemens@email-addr-hidden>
Date: Wed Mar 09 2005 - 15:58:05 EET

krsrtn wrote:
> after that I looked at what you said, /proc/bus/usb/devices::
> ...
> D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
> P: Vendor=086a ProdID=0102 Rev= 0.01
> C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> ...

The firmware wasn't loaded.

> ok. this is the output of lsusb after I modprobed emi26:
>
> Bus 004 Device 002: ID 086a:0102 Emagic Soft-und Hardware GmbH

The emi26 module expects the device to have product ID 0100. It seems
you have a new hardware revision.

I'll see if I can update the emi26 driver.

Regards,
Clemens
Received on Wed Mar 9 20:15:04 2005

This archive was generated by hypermail 2.1.8 : Wed Mar 09 2005 - 20:15:04 EET