[linux-audio-dev] sblive hints

Hi all,

I have a soundblaster live.
I also am using debian/demudi and have a dual PIII 500 mhz.

I am looking for hints on how to optimize my card with alsa and jack
etc.

I once had found on the alsa site example of .asoundrc tailored for
the sblive but now on searching I don't see such an animal.

I want to use skype or a voice over ip in additon to audio processing.

I find that with my setup I get clicks where I can't hear the other
person.

I am doing some mixes where I need as much umph from my system as
possible and especially my sound card. I see that when I check my
irq's my sound card is:

theone:/home/aamehl# cat /proc/interrupts
           CPU0 CPU1
  0: 190504469 36529323 IO-APIC-edge timer 0/33792
  2: 0 0 XT-PIC cascade 0/0
  7: 0 0 IO-APIC-edge parport0 0/0
 14: 852744 235050 IO-APIC-edge ide0 0/87773
 15: 14 0 IO-APIC-edge ide1 1/12
145: 15477006 1925905 IO-APIC-level aic7xxx, aic7xxx, nvidia 0/2911
153: 15069558 1527074 IO-APIC-level EMU10K1 0/96632
161: 3021752 703622 IO-APIC-level uhci_hcd, eth0 0/25374
NMI: 0 0
LOC: 227042766 227042753
ERR: 0
MIS: 0

153 and most of the other devices are not addon cards but part of the
mother board. I can't move my video card and the ethernet is onboard.
Is all lost or can I give more priority to the sblive?

Any other suggestions are welcome as far as squezzing performance out
of my 128megs rams.

Thanks
Aaron
Received on Sun May 29 16:15:05 2005