Re: [LAD] Tascam US 122

Shawn Wallis wrote:
> I downloaded alsa-firmware and fxload from medibuntu, it loads the
> firmware fine, the lights go on and alsa recognizes it. I get errors in
> dmesg and jackd doesn't work.
>
> I get this with jackd:
> 23:01:43.405 JACK is starting...
> 23:01:43.406 /usr/bin/jackd -R -dalsa -dhw:2 -r96000 -p1024 -n3
> 23:01:43.434 JACK was started with PID=22944.
> jackd 0.109.2
> Copyright 2001-2005 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
> JACK compiled with System V SHM support.
> cannot lock down memory for jackd (Cannot allocate memory)
> loading driver ..
> apparent rate = 96000
> creating alsa driver ...
> hw:2|hw:2|1024|3|96000|0|0|nomon|swmeter|-|32bit control device hw:2
> configuring for 96000Hz, period = 1024 frames (10.7 ms), buffer = 3
> periods ALSA: final selected sample format for capture: 24bit
> little-endian ALSA: use 3 periods for capture
> ALSA: final selected sample format for playback: 24bit little-endian
> ALSA: use 3 periods for playback
> ALSA: cannot set hardware parameters for playback
> ALSA: cannot configure playback channel
> cannot load driver module alsa

please take note that there's no usb1.1 device in the universe that can
run on a 96000hz sample rate. try 44100 or 48000, nothing more, nothing
less.

byee

-- 
rncbc aka Rui Nuno Capela
rncbc@email-addr-hidden
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev