Clemens Ladisch wrote:
> "Busy" means that it's there, but already being used. Many motherboard
> BIOSes do not initialize the third HPET interrupt, and the first two are
> taken by the kernel.
I would like to make a test song using HR timer, but unfortunately I'm
not able to close a project and open it again, even after doing a reset.
Hem?
From a mail I wrote yesterday to another list:
"the good news is, that using HR timer will cause less jitter than the
usage of any other timer.
The bad news are
- Open Octave will freeze the system when selecting HR timer
- Qtractor is fine with HR timer, BUT only when I start a project. Once
I closed it and try to load it again (even after doing a reset) I get
this error:
"This system has no accessible HPET device (Device or resource busy)"" [1]
"2.6.31.5-rt18 x86_64 and run jackd -Rch -dalsa -dhw:0 -r96000 -p512 -n2
-Xseq. JACK is jackdmp 1.9.3. The self build kernel might be buggy." [1]
" ||HR tmr|System|PCM pl|PCM ca
------++------+------+------+------
500.0|| 504.9| 505.6| 503.4| 503.2
1000.0||1005.4|1005.8|1005.3|1006.4
1500.0||1503.6|1506.4|1507.4|1507.3
2000.0||2003.8|2007.2|2007.9|2009.5
2500.0||2504.1|2504.3|2503.6|2503.2
3000.0||3006.0|3006.2|3005.9|3007.6
3500.0||3502.7|3505.4|3506.5|3509.5
4000.0||4003.1|4003.2|4008.8|4009.9
msec +/- 0.1 msec
maxDif|| 6.0| 7.2| 8.8| 9.9
minDif|| -2.7| -3.2| -3.4| -3.2
--------------+------+------+------
Jitter|| 3.3| 4.0| 5.4| 6.7
msec +/- 0.2 msec" [1]
[1] http://lists.64studio.com/pipermail/64studio-users/2009-November/003885.html
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/mailman/listinfo/linux-audio-dev
Received on Thu Nov 12 16:15:03 2009
This archive was generated by hypermail 2.1.8 : Thu Nov 12 2009 - 16:15:03 EET