On Tue, Jan 26, 2010 at 1:19 PM, Kjetil S. Matheussen
<k.s.matheussen@email-addr-hidden> wrote:
>
> (I don't agree about the linux-audio-* mailing list
> announcement policy, so from now on, program announcements
> will only be posted to linux-audio-announce@email-addr-hidden !)
>
>
>
> Download from
> =============
> http://archive.notam02.no/arkiv/src/?C=M;O=D
>
>
>
> jack_capture
> ============
> jack_capture is a program for recording soundfiles with jack.
>
> The default operation of the program is executed by writing "jack_capture"
> in the terminal without any extra command line options:
>
> $ jack_capture
>
> ...which will record what you hear in your loudspeakers
> into a stereo wav file.
>
>
>
> Most important new features since 0.9.36
> ========================================
> * Direct support for mp3 using liblame.
> * Console cleanup. Terminal should not be messy
> when quitting jack_capture.
> * Better buffering schemes.
> * Less used memory.
>
>
>
> Features
> ========
> * Autogenerated filenames are unique and humanly readable.
>
> * The 4GB size barrier for wav files is handled by continuing
> writing to new files when reaching 4GB.
>
> * Supports all soundfile formats supported by sndfile.
> (wav, aiff, ogg, flac, wavex, au, etc.) (option: -f <format>)
>
> * Supports mp3 by using liblame. (option: -mp3)
>
> * Option for writing raw 16 bit data to stdout. (option: -ws)
>
> * Built-in console meter, plus option for automatically starting
> and stopping the Meterbridge jack meter program. Port
> connections to Meterbridge are done automatically, and
> on the fly, by jack_capture.
>
> * jack_capture can connect to any input or output jack port.
>
> When "connecting" to a jack input port (i.e. a writable
> port), jack_capture constantly monitors which jack ports
> which are connected to the input port, and make sure
> jack_capture is always connected to the same ports.
>
> In other words, jack_capture will reconnect its ports
> automatically during recording to match the connections
> of the ports. This is for instance convenient when
> recording the playback ports since jack_capture can be
> started first, and then other programs can start and
> stop at any moment while all sound still should be recorded.
>
> * No limit on the number of jack ports jack_capture can connect to.
> (I.e. the --port argument can be specified more than once, plus
> that it accepts wildcard arguments. For instance,
>
> jack_capture --port "*"
>
> will connect to all current jack ports, both input and output
> ports, except jack_capture's own ports.)
>
> * Buffers are automatically increased during runtime to prevent
> underruns and to avoid wasting memory by preallocating too much.
> (handled by using lockless atomic fifo/lifo queues to store
> temporary sound data instead of ringbuffers)
>
> * The disk thread is automatically reniced to a higher priority when
> using more than half of the buffer.
>
> * Significantly better recording performance than Ardour.
> (probably because jack_capture writes all channels into
> only one file and that it is not creating peak files).
> (tested on athlonXP)
>
> * No problem writing at least 256 channels of 32 bit wav at once to a
> local hard drive. (tested on icore7)
>
> _______________________________________________
> Linux-audio-dev mailing list
> Linux-audio-dev@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-dev
>
Kjetil,
Installed and works on Gentoo 64bit. Recording works fine for a good
standard. Tested recording WAV, Flac, and Ogg.
Gui displayed correctly in fluxbox.
Thank you.
Alex.
-- www.openoctave.org midi-subscribe@email-addr-hidden development-subscribe@email-addr-hidden _______________________________________________ Linux-audio-dev mailing list Linux-audio-dev@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-devReceived on Tue Jan 26 16:15:03 2010
This archive was generated by hypermail 2.1.8 : Tue Jan 26 2010 - 16:15:03 EET