Re: [LAD] [alsa-devel] 2.6.31.x vs. rme vs. alsa 1.0.22?

On Tue, 2010-02-23 at 00:20 +0000, Fernando Lopez-Lezcano wrote:
> On Tue, 2010-02-23 at 00:16 +0000, Fernando Lopez-Lezcano wrote:
> > On Mon, 2010-02-22 at 23:51 +0000, Fernando Lopez-Lezcano wrote:
> > > On Tue, 2010-02-16 at 17:58 -0800, Fernando Lopez-Lezcano wrote:
> > > > Hey, has anyone been seeing strange behavior from this combination?
> > > >
> > > > kernel 2.6.31.x rt20 + alsa 1.0.22 userland
> > > > RME card (pcmcia card + multiface)
> > > >
> > > > hdspmixer is not doing the right thing (does not initialize the card in
> > > > a way in which playback works), it does not see the hwdep interface (or
> > > > something like that) and disables metering,
> > [MUNCH]
> > > I have been trying to see if I can figure _anything_ out of this...
> > >
> > > A diff of 2.6.29 (last known working) against 2.6.31.12 reveals
> > > something that might have an influence on the problem:
> > >
> > > in snd_hdsp_create_hwdep there are two lines added:
> > >
> > > + hw->ops.open = snd_hdsp_hwdep_dummy_op;
> >
> > Hmmm, looks like snd_hdsp_hwdep_dummy_op is not passing back the
> > hdsp->hwdep structure to the open call at all (returning 0 is not enough
> > from the description of the alsa api). That would explain what is
> > happening, most probably no ioctls are found...
> >
> > Am I on the right track?
>
> Argh. I was looking at the diff backwards (DOH!). The ops.open and
> ops.release ioctl calls are _missing_ in the 2.6.31.12 tree.

The attached patch starts to make a difference (it restores the two
missing ops in hw->ops. Once the card is recognized and the firmware is
downloaded the pcmcia card + Multiface appears to be functional. Cool.

...

Now, recognizing the card is not working fully (Fedora 11 + rt kernel).
>From a cold start the card is recognized but it is not fully functional,
a rmmod snd_hdsp followed by a modprobe snd_hdsp fixes that.

Here are the relevant dmesg entries:

Insert pcmcia card, multiface power cycled before that so firmware is
not loaded:

----
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:16:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
RME Hammerfall DSP 0000:16:00.0: enabling device (0000 -> 0002)
RME Hammerfall DSP 0000:16:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
ALSA sound/pci/rme9652/hdsp.c:679: Hammerfall-DSP: iobox found after
2260ms!
ALSA sound/pci/rme9652/hdsp.c:831: Hammerfall-DSP: wait for FIFO status
<= 0 failed after 30 iterations
RME Hammerfall DSP 0000:16:00.0: firmware: requesting
multiface_firmware_rev11.bin
ALSA sound/pci/rme9652/hdsp.c:696: Hammerfall-DSP: loading firmware
ALSA sound/pci/rme9652/hdsp.c:729: Hammerfall-DSP: finished firmware
loading
ALSA sound/pci/rme9652/hdsp.c:659: Hammerfall-DSP: no Digiface or
Multiface connected!
ALSA sound/pci/rme9652/hdsp.c:659: Hammerfall-DSP: no Digiface or
Multiface connected!
ALSA sound/pci/rme9652/hdsp.c:659: Hammerfall-DSP: no Digiface or
Multiface connected!
ALSA sound/pci/rme9652/hdsp.c:659: Hammerfall-DSP: no Digiface or
Multiface connected!
----
So, the firmware is loaded (apparently) but hdsp_check_for_iobox does
not see the Multiface.  But the devices appear to be there (card #1):
----
$ cat /proc/asound/devices
  2:        : timer
  3:        : sequencer
  4: [ 0- 1]: digital audio playback
  5: [ 0- 0]: digital audio playback
  6: [ 0- 0]: digital audio capture
  7: [ 0- 0]: hardware dependent
  8: [ 0]   : control
  9: [ 1- 0]: raw midi
 10: [ 1- 0]: digital audio playback
 11: [ 1- 0]: digital audio capture
 12: [ 1- 0]: hardware dependent
 13: [ 1]   : control
----
Starting hdspmixer prints:
----
$ hdspmixer 
HDSPMixer 1.6 - Copyright (C) 2003 Thomas Charbonnel <thomas@email-addr-hidden>
This program comes with ABSOLUTELY NO WARRANTY
HDSPMixer is free software, see the file COPYING for details
Looking for HDSP cards :
Card 0 : HDA Intel at 0xfe020000 irq 17
Card 1 : RME Hammerfall DSP + Multiface at 0xc0000000, irq 16
Multiface found !
1 Hammerfall DSP card found.
Initializing default presets
----
Everything seems to be there but if I start jackd it starts fine but I
get no sound from the outputs. 
Something has not been initialized properly. I get this at some point:
----
ALSA sound/pci/rme9652/hdsp.c:4589: Hammerfall-DSP: firmware needs to be
uploaded to the card.
----
Now close jack, hdspmixer. 
/sbin/rmmod snd_hdsp
/sbin/modprobe snd_hdsp
----
RME Hammerfall DSP 0000:16:00.0: PCI INT A disabled
RME Hammerfall DSP 0000:16:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16
ALSA sound/pci/rme9652/hdsp.c:679: Hammerfall-DSP: iobox found after
0ms!
ALSA sound/pci/rme9652/hdsp.c:5106: Hammerfall-DSP: Firmware already
present, initializing card.
----
After that jackd is happy and the card works...
Any help appreciated!!
-- Fernando

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev