On Tue, 2010-02-23 at 22:26 +0100, Florian Faber wrote:
> On 02/23/10 22:22, Paul Davis wrote:
> > On Tue, Feb 23, 2010 at 3:48 PM, Fernando Lopez-Lezcano
> > <nando@email-addr-hidden> wrote:
> >
> >> ALSA sound/pci/rme9652/hdsp.c:831: Hammerfall-DSP: wait for FIFO status
> > <= 0 failed after 30 iterations
> >
> > this is bad, and i think may be related to your issues. this
> > timing-sensitive loop has always been a problem. it probably just
> > worked the 2nd time you tried a firmware load (by good luck).
>
> I wonder if this happens with the PCI interface as well or if this is
> just another CardBus-Fuckup. Once again.
One test later. Not the same environment, it is a desktop with a pci
card and a digiface (instead of a multiface). 2.6.31.12-rt21 with the
patch that restores functionality to snd_hdsp seems to work fine:
---- $ dmesg | grep -i hdsp ALSA sound/pci/rme9652/hdsp.c:678: Hammerfall-DSP: iobox found after 0ms! ALSA sound/pci/rme9652/hdsp.c:830: Hammerfall-DSP: wait for FIFO status <= 0 failed after 30 iterations ALSA sound/pci/rme9652/hdsp.c:695: Hammerfall-DSP: loading firmware ALSA sound/pci/rme9652/hdsp.c:728: Hammerfall-DSP: finished firmware loading ---- After booting the card seems to work (it was disconnected from the firewire wire while it was rebooting). But same problem with the wait for FIFO failing. So maybe it is not so different after all. -- Fernando _______________________________________________ Linux-audio-dev mailing list Linux-audio-dev@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-devReceived on Wed Feb 24 04:15:02 2010
This archive was generated by hypermail 2.1.8 : Wed Feb 24 2010 - 04:15:02 EET