Re: [LAD] digiface vs. multiface vs. jack vs. other cards

Hi Fernando
Can't help you on the coding but if you find a way to link two RME PCI hdsp
cards to show as one please pass this along.

I have two cards that I have to constantly change as the Bois seems to
change the order of the cards on Boot up ( I use jack to select the cards)

Cheers
Bob
Blueslsd

On 29 March 2010 18:49, Fernando Lopez-Lezcano <nando@email-addr-hiddenwrote:

> At CCRMA we have several studios with linux computers in them (in
> addition to computers sprinkled throughout the building). Some of the
> studios have digiface interfaces, some multiface. All of them are
> connected to the sound system or mixer digitally through adat
> lightpipes. Workstations have Delta 66 or Gina3G soundcards.
>
> It would be nice for a user to be able to play, say, a stereo Ardour
> session in any of them without any changes to the session or routing.
>
> The digifaces send channels 1-24 out the adat ports. The multifaces on
> the other hand send 9-16 on the adat port. Deltas and Ginas send out
> stuff on channels 1-4 or 1-6.
>
> You can see the multiface interfaces are a problem. To get sound out of
> them you have to send on channels 9-16 which is different from _all_
> others!
>
> I tried several workarounds without much success:
>
> a) fix this at the alsa level. Should be the way to go, right? Create
> an /etc/asound.conf that uses ttable to translate channels for the
> multifaces so that the digital out is actually sent through channels 1-8
> (and create the same name plug interface in all other computers that
> does nothing so that the user can set that name as the default in
> qjackctl and will get the same behavior in all computers).
>
> Works, but not quite. When I try to use that "fake" plug interface with
> jack2 I get a warning that I'm using a plug interface (sort of fair) and
> jack only opens it with _2_ i/o channels (even though the ttable is 18
> channels wide!). If I _force_ input and output channels in jack to 18 it
> does work fine. But now it will _not_ work on other computers that have
> less (or more) than 18 channels. Argh.
>
> b) fix it in hdspmixer. Well, it turns out that hdspmixer does not read
> the default matrix gains from a file so I can't really override the
> default. AFAICT the gains are calculated algorithmically in the code and
> there is no command line option to load presets from a file.
>
> Or I could write a small script that will set the right gains for 1-8 to
> go out through 9-16 but if a user starts hdspmixer that gets undone with
> no warning.
>
> And, of course:
>
> c) give up and connect an 8 channel analog snake to the analog outputs
> of the multifaces and do away with a digital connection to the mixer...
>
> Anyone has any other suggestions??
> This should be easy to fix, right?
> :-)
> -- Fernando
>
>
> _______________________________________________
> Linux-audio-dev mailing list
> Linux-audio-dev@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-dev
>

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Tue Mar 30 04:15:02 2010