Re: [LAD] Is RME HDSPe AES supported by alsa?

From: Florian Faber <faber@email-addr-hidden>
Date: Thu May 06 2010 - 23:14:05 EEST

On 05/06/10 19:46, Niels Mayer wrote:

> Unlike custom VLSI,
> you can't just plop a FPGA on the pci bus. Note that the Xilinx isn't
> the only chip on this
> card: http://www.soundworks.dk/images/rme/hdsp9632_big.jpg -- there's at
> least 6 other chips in the "digital" part of the card, some of
> high-complexity/integration/cost based on their pincount -- in addition
> to the Xilinx chip. That includes an additional Xilinx chip (flash
> memory??) that is clearly visible on the above pictured board.

This is an extremely old design you are looking at. At least 10 years old.

Of course you can interface with PCI. You just do it. You can interface
with anything. Take the MADIface for example - one Spartan 3, one flash,
finished. From PCIe to MADI out everything in a small gum strip.

Please check out the Xilinx application note library to see what else is
possible, and why you want FPGAs in your circuits.

Flo

-- 
Machines can do the work, so people have time to think.
public key DA43FEF4          x-hkp://wwwkeys.eu.pgp.net
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Fri May 7 00:15:04 2010

This archive was generated by hypermail 2.1.8 : Fri May 07 2010 - 00:15:04 EEST