Re: [LAD] Routing signals in mixer (Ardour, Qtractor)

From: Jeremy <autostatic@email-addr-hidden>
Date: Thu Jul 15 2010 - 14:48:25 EEST

Louigi Verona wrote:
>
>
> On Wed, Jul 7, 2010 at 4:55 PM, Jeremy Jongepier <jeremy@email-addr-hidden
> <mailto:jeremy@email-addr-hidden>> wrote:
>
> Ok, got it working in Qtractor:
> - In Qtractor I've created four tracks with corresponding buses: Formant
> Synth
> (1 channel), Carrier Voice (1 channel), Vocoder (2 channels) and Vocoder
> Mix (2 channels)
> - All tracks output their signal to their corresponding buses,
> except for Vocoder Mix which outputs to the Master output buses
> - Then I've loaded the vocoder LADSPA plugin into the Vocoder track.
> Input 1 of the Vocoder bus is the carrier and input 2 is the formant
> - After that I've made the following connections in Qtractor's
> Connections window:
> http://linux.autostatic.com/images/2010-07/vocoder-connections.png
>
>
>
> Wow!
> Fantastic! You are THE man!
> Tell me, why do you need Vocoder Mix? Why can't Vocoder output straight
> to Master Out?
> I will try the above myself, of course, but just curious.
>
>
> --
> Louigi Verona
> http://www.louigiverona.ru/

Hello Louigi,

You can output the Vocoder output to the Master outputs but then you
cannot adjust the volume and panning within a single track.
Also, if you have multiple tracks with sidechaining like the vocoder
example it can get quite inconvenient.

Best,

Jeremy
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Fri Jul 16 20:15:22 2010

This archive was generated by hypermail 2.1.8 : Fri Jul 16 2010 - 20:15:22 EEST