Re: [LAD] Routing signals in mixer (Ardour, Qtractor)

From: Louigi Verona <louigi.verona@email-addr-hidden>
Date: Thu Jul 15 2010 - 15:07:10 EEST

On Thu, Jul 15, 2010 at 4:04 PM, Jeremy <autostatic@email-addr-hidden> wrote:

>
>
> Louigi Verona wrote:
>
>> So I see. But I am still interested in how he did what he reported since I
>> still cannot get
>> his scheme to work.
>>
>>
>> ------------------------------------------------------------------------
>>
>
> Sorry for the late replies,
>
> The Vocoder track needs to be a 2 channel track, one input will be assigned
> to the carrier input of the vocoder LADSPA plugin and the other to the
> formant input. Input 1 of the Vocoder track/bus is the carrier, input 2 the
> formant.
> It also doesn't matter if the sources for the carrier and formant are
> internal or external, in my case I connected Yoshimi to the Formant Synth in
> port, but you could also connect the output of a specific track. The same
> goes for the carrier, in my case it's the built-in mic (system capture), but
> it could also be the output of a specific track.
> I think what is important is that you create separate buses for all your
> tracks and use these buses for both input and output on all your tracks
> except on the mix tracks. All tracks have to be monitored, not their inputs
> or outputs but the tracks themselves, so the middle part of the Qtractor
> Mixer panel.
> Hope that helps a bit. I have access to only my netbook (I'm on vacation,
> long live Android and mobile internet) but maybe I can make some screenshots
> of how to set up the Qtractor Mixer panel.
>
> Best,
>
> Jeremy
>
>

I did it exactly as you described. I got a mix of original sound and vocoded
sound.
You should recheck what you did and make sure that you get a clean vocoded
sound.

-- 
Louigi Verona
http://www.louigiverona.ru/

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Fri Jul 16 20:15:23 2010

This archive was generated by hypermail 2.1.8 : Fri Jul 16 2010 - 20:15:23 EEST