On Thursday 12 August 2010 21:42:49 Niels Mayer wrote:
> On Wed, Aug 11, 2010 at 1:35 PM, <fons@email-addr-hidden> wrote:
> > Not really, EQ normally being pre-fader. Post-fader meters in a mixer
> > strip are useful only of the signal being metered is actually one
> > that is physically available on some connector, e.g. as a direct out.
> > It would not indicate any overload that occurs pre-fader.
>
> The only time I've seen EQ pre-frader is low-cut on a microphone
> preamp. I was using standard "mixing board" definitions of PFL and AFL
> per, http://www.mackie.com/support/faq/index.html
I would really like to see a mixer that has the EQ post the fader. Sounds
pretty dumb to me. That way the effect of the EQ would be influenced by the
volume after the fader. Not good... And as most consoles have the insert (by
default) pre fader, this would also put the inserts pre EQ...
EQ after the initial gain is something totally different though;)
Have fun,
Arnold
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
This archive was generated by hypermail 2.1.8 : Fri Aug 13 2010 - 04:15:04 EEST