On Tue, Aug 17, 2010 at 3:25 PM, Tim E. Real <termtech@rogers.com> wrote:
> Try my patches. See AUTHORS for changes and TODOs.
> Once again set up a fresh mudita24-1.0.3 folder and apply these patches.
So I applied the patches (
http://lists.linuxaudio.org/pipermail/linux-audio-dev/attachments/20100817/d02f8aaa/attachment.bin
) by doing
'cat mudita24-1.0.3-patches-2/*.diff | patch -p1 --backup' in the
mudita-1.03 directory (
http://nielsmayer.com/envy24control/mudita24-1.0.3.tar.gz ) and it all
looks great and works nicely.
Seems much easier to control and snappier than 1.03, which seemed to
slow things down with the sliders (or the ALSA level callbacks) versus
1.0 version. Now it's back to feeling quick again.
The one regression I'm seeing versus the original 1.03 version: when
you move the sliders up and down in "Monitor Inputs" or "Monitor
PCMs", the dB labels change width going from -X.X to -XX.X (e.g.
"-9.9" to "-10.0" changes width). This width change propagates through
gtk so that if you do it on the left-most slider, all the other
sliders will jostle-around horizontally as you sweep the attenuator
downwards from +0.0 past -9.99 ... This is not happening on "Analog
Volumes" -- I think I solved this issue in the original code by adding
a space after the last decimal if the value > -10.0.
> Let me know if you want them in another form, applied to some later
> version or something.
Nope, I've been waiting on your changes and doing other things.
> I have not touched the meters or slider ranges yet.
> But I think I have accomplished what I primarily set out to do, which is
> have slider markings and make them, and the analog slider min/max,
> depend on ALSA, to support different codec chip(s).
> *** That is the part which needs testing by all of you with various cards !
I will test the Terratec DMX6fire next...
> Observe the analog slider markings/stepping and let me know of any problems.
One other regression I noted is that with the -n ( --no_scale_mark )
option leaves some extra space in the "Analog Volumes" panel, compared
to the 1.03 version.
I also notice that in 1.03, I forgot to add verbiage for the "-g" (
--channel_group_modulus )option to the --help output.
> I couldn't figure out a way to make the mouse wheel snap to the markers,
> wheel gives the same scroll type as moving the slider: GTK_SCROLL_JUMP.
Will test that along with the Terratec. Given how coarse the
ADC/DAC/mixer controls are to begin with, is there a way to set the
mouse scroll wheel to always increment/decrement the dB value by its
minimum step-size (e.g. 1.5dB for attenuator, 0.5dB for DAC/ADC)? Last
I checked, mouse-scroll incremented/decremented by two "clicks" --
whereas next/prev keys moved by one "click."
> There may well be a few fixes and tweaks later, but I think this is how
> I wanted it to be so far. Hopefully we can now move forward with other
> items discussed.
Looks good. I'm pretty happy with the resolution and actual gain
control provided by 0 to -48dB, but if you have something different in
mind, go for it...
> Devels: Note that if we wish to remove some of the marker texts later
> to reduce clutter, please keep the actual marks, as this is now what the
> sliders snap to (unless there are no markings at all, or they're turned off,
> in which case it uses the sliders' own page increment values.)
I like the current level of granularity.
-- Niels
http://nielsmayer.com
PS: Feature request -- have an "L/R gang" available on sets of inputs
in the ADC/DAC section where the size of the set is the "-g" value,
e.g. 2 by default for stereo. This would allow the option of changing
volumes on all channels of a multichannel setup simultaneously. a "-g
4" would allow, for example two groups of four channels, and a "-g 8"
would allow a single group of eight channels. Like the L/R Gang
control on the mixer, this control would be optionally enabled.
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Wed Aug 18 04:15:03 2010
This archive was generated by hypermail 2.1.8 : Wed Aug 18 2010 - 04:15:03 EEST