[LAD] [OT] 3ghz coax and soldering...

hi everybody!

forgive the ot post, but i hope there are some brains to pick here.

i'm planning a studio, and to make it future-proof, there is coax in
every room. currently it's going to be used for rgbhv and composite
video, but i want it to be future-proof for MADI and HD-SDI.

the cabling itself is of sufficient quality, but i'm doubtful about the
connectors. the whole installation has a star topology, so the worst case is

* source
* 5m or so of suitable cable
* bnc wall socket
* 20m installation cable (-63dB/100m @ 3ghz)
* a ghielmetti patchbay (which includes two canare contacts to the patch
cord and two bnc on the rear, unfortunately)
* another 20m installation cable
* bnc wall socket
* another 5m cable
* sink

question 1: any hopes for reliable hd-sdi?

question 2: how can it be that a kick-ass company like ghielmetti does
not offer video patchbays that allow direct connection of coax
installation cables, but require rear bnc connections instead?

question 2b: is there an alternative for direct rear coax connection,
thereby cutting out two potentially disruptive contact surfaces?

question 3: i'm thinking of getting neutrik isolated bnc connectors (the
d-type ones that are semi-recessed and thus well protected from clumsy
passers-by). but their soldering lugs break the coaxial structure -
cause for concern?

question 4: do i really want to solder hf stuff (even though the
voltages are not too high), or will it unsolder itself eventually? any
recommendations as to procedures and tin?

thanks in advance,

jörn

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Wed Jan 19 00:15:06 2011