Re: [LAD] Midi Channel routing with hardware?

From: Kaspar Bumke <kaspar.bumke@email-addr-hidden>
Date: Tue Apr 10 2012 - 23:31:40 EEST

Hi,

tl;dr: Is there a cheap midi hardware that just gets midi information in
> and routes it out, except on a different, single, channel which I can
> change easily up and down directly on the hardware?
>

There is hardware stuff out there. Have a look for "hardware midi filter"
or "hardware midi event processor". This one for instance:
http://www.midisolutions.com/prodevp.htm

I have never used any of these so I can't say much more about them.

I know I can do the channel routing directly on my linux computer, after
> receiving the data and before sending it to a sampler. But that is
> inconvenient.
>

You could write something in mididings that would could route the incoming
midi data to different channels depending on what you press on your
footpedal: http://das.nasophon.de/mididings/

Regards,

Kaspar

On 22 March 2012 20:54, Nils <list@email-addr-hidden> wrote:

> Hello list,
>
> tl;dr: Is there a cheap midi hardware that just gets midi information in
> and routes it out, except on a different, single, channel which I can
> change easily up and down directly on the hardware?
>
> Long version:
> Recently my master keyboard broke. It was just a cheap, used m-audio
> keystation 49e. I did not buy a new master-keyboard because I have a Roland
> HP207e digital piano here which is vastly superior when it comes to actual
> playing. Sadly not to control midi data.
>
> I have a Behringer BCF2000 here which I connected to my keyboard now, so I
> should be able to do something with it, but there is one thing missing:
> Channel Changes.
>
> Anybody who worked with Linuxsampler knows that channel switching is very
> important to switch instruments, while program changes are neglectable.
>
> So maybe there is a way to use my piano, which always sends on the first
> channel (except I dive into inaccessible menus) if
> a) I find a way to shortcut the "change channel" command, but I don't know
> how. It has midi in and a usb connector, but that is not used to control
> it, just to send and receive midi data. Incoming data gets interpreted like
> a sampler does.
>
> b) There is a way to use my BCF2000. I am very inexperienced with that
> thing.
>
> c) There is a cheap standalone hardware, just a "little box", I can plugin
> between my linux box and the piano, which re-routes the midi data, like I
> mentioned in the short version above.
>
> d) I build something myself, a small linux plug computer where I somehow
> attach two buttons (ch up and dow) and use the usb connections. At least
> the cables are cheaper :) But this is the most unrealistic method,
> although it might be the most interesting one.
>
>
> Maybe you know something?
>
> Nils
>
> P.S. I know I can do the channel routing directly on my linux computer,
> after receiving the data and before sending it to a sampler. But that is
> inconvenient.
>
>
>
> _______________________________________________
> Linux-audio-dev mailing list
> Linux-audio-dev@email-addr-hidden
> http://lists.linuxaudio.org/listinfo/linux-audio-dev
>

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Wed Apr 11 00:15:02 2012

This archive was generated by hypermail 2.1.8 : Wed Apr 11 2012 - 00:15:02 EEST