On Mon, Mar 18, 2013 at 07:43:32PM -0400, Tim E. Real wrote:
> Ah, I may have answered my own question when I said:
> "(One cannot simply wait for the current data value to be 'zero' because
> for example with a perfect square wave signal the 'current' value will never
> approach zero, hence the zero-crossing detection requirement.)"
The analog waveform always 'approaches' zero - it's bandlimited and hence
continuous - it just may not happen at a sample point. In fact the chance
that it happens exactly at a sample point is zero.
> So having no choice but to apply the volume at this cross point the popping
> noise might still be heard. I guess that's what Fons meant by 'reduced'...
> and what Paul meant by... bogus. Right?
Imagine a signal slowly passing through zero, e.g. a low frequency
sine wave. If you switch gain at an arbitatry point there will be
a 'step', having a 1/F spectrum (just like a square wave). If you
switch at a zero crossing there will be 'sharp corner', and this
has a 1/(F^2) spectrum (like a triangular wave). So instead of a
sharp click there will be something more like a 'thump'. The only
real solution is to never switch the gain, but change it smoothly.
Caio,
-- FA A world of exhaustive, reliable metadata would be an utopia. It's also a pipe-dream, founded on self-delusion, nerd hubris and hysterically inflated market opportunities. (Cory Doctorow) _______________________________________________ Linux-audio-dev mailing list Linux-audio-dev@email-addr-hidden http://lists.linuxaudio.org/listinfo/linux-audio-devReceived on Tue Mar 19 04:15:03 2013
This archive was generated by hypermail 2.1.8 : Tue Mar 19 2013 - 04:15:03 EET