On Wed, Aug 20, 2014 at 10:37 AM, Len Ovens <len@email-addr-hidden> wrote:
> On Mon, 18 Aug 2014, Fons Adriaensen wrote:
>
> A slightly better mapping would be 80 step of 0.5 dB for the
>> range +10...-30, then smoothly increase the step size to arrive
>> at a minimum gain of -70 dB or so. Even for this the calculations
>> are trivial.
>>
>
> I thought this was quite exciting, the idea of being able to use a linear
> input and map it directly to DB. However, Mixers don't look like that, the
> area from plus 10 to -10 takes up a whole lot more room on the fader travel
> than anything lower than that.
if you haven't discovered this yet, you will find that ardour does the same
non-linear, volumetric mapping of fader position.
_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@email-addr-hidden
http://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Wed Aug 20 20:15:02 2014
This archive was generated by hypermail 2.1.8 : Wed Aug 20 2014 - 20:15:02 EEST