On Sat, Sep 02, 2017 at 11:54:15AM -0400, Fred Gleason wrote:
> One approach that I’ve used with good success here is to run
> the decoded PCM through a FIFO buffer between the SRC and the
> play-out stages and then use the size of that FIFO (which will
> change dynamically in response to things like network congestion)
> to feed a PLL that drives the converter ratio for the SRC stage.
Which is what zita-ajbridge and njbridge do in software.
The difference is that since data enters and leaves the
fifo in blocks of samples and not as a constant rate stream
it's a bit more involved to obtain the (average) FIFO size.
Ciao,
-- FA A world of exhaustive, reliable metadata would be an utopia. It's also a pipe-dream, founded on self-delusion, nerd hubris and hysterically inflated market opportunities. (Cory Doctorow) _______________________________________________ Linux-audio-dev mailing list Linux-audio-dev@lists.linuxaudio.org https://lists.linuxaudio.org/listinfo/linux-audio-devReceived on Sun Sep 3 20:15:01 2017
This archive was generated by hypermail 2.1.8 : Sun Sep 03 2017 - 20:15:01 EEST