Re: [LAD] Looking for interested developer - TonePrint editor & TC Electronic Plethora X5

From: Mark Knecht <markknecht@email-addr-hidden>
Date: Thu May 28 2020 - 17:08:25 EEST

On Thu, May 28, 2020 at 4:31 AM Sam Kuper <sampablokuper@email-addr-hidden> wrote:
>
> On Tue, May 26, 2020 at 04:57:14PM -0700, Mark Knecht wrote:
> > I purchased [a TC Electronic Plethora X5]. It works well (so far).
> > It's Linux internally running 4.9.47-rt37.
>
> I'm curious: how do you know which kernel your Plethora X5 uses?
>

The front panel menu system:

Global->About->BSP-> Linux 4.9.47-rt37 2019-12-20.C23818C

Granted, I cannot prove that because it says the above that it's really
running Linux, but I'd guess it is.

> Also, do you know which microprocessor(s)/FPGA(s) the Plethora X5 uses?
>

No idea at this time. Also no idea about A/D & D/A.

In my mind the unit is essentially a 1 channel DAW that can handle 5
plugins as well as an insert bus that can be put anywhere in the chain.
Running plugin modules, be they LADSPA or whatever is more or less how I
see the design.

> I'm partly asking because I wonder if the X5 might be able to run
> software from Mod Devices or vice versa. Mod Devices makes ARM-based
> multi-FX guitar pedals that run Linux: akin to the X5 but using
> LADSPA/LV2 plugins instead of TonePrint ones: https://moddevices.com
>
> Finally, do you know if TC Electronic has published any of the source
> code relevant to the Plethora X5?

<SNIP>

I haven't looked hard for any of that but I also haven't seen it in the
manual or on their website.

<SNIP>

> If you plug the Plethora X5 into a Linux box via USB, how does it
> present itself to the host?
>
> # Run this on your GNU/Linux box with the X5 not connected:
> lsusb --tree > /tmp/lsusb_x5_disconnected.txt
>
> # Run this on your GNU/Linux with your X5 powered up and connected
> # to it via USB but everything else the same as above:
> lsusb --tree > /tmp/lsusb_x5_connected.txt
>
> # Copy the output of this command and paste it into a reply to this
> # email:
> diff /tmp/lsusb_x5_disconnected.txt /tmp/lsusb_x5_connected.txt
>

mark@email-addr-hidden:~$ diff /tmp/lsusb_x5_disconnected.txt
/tmp/lsusb_x5_connected.txt
10a11,13
> |__ Port 2: Dev 3, If 0, Class=Audio, Driver=snd-usb-audio, 480M
> |__ Port 2: Dev 3, If 1, Class=Audio, Driver=snd-usb-audio, 480M
> |__ Port 2: Dev 3, If 2, Class=Mass Storage, Driver=usb-storage, 480M
mark@email-addr-hidden:~$

In Windows when you plug the device in your get a explorer window. Dropping
a firmware update into that window and power cycling does the firmware
upgrade automatically.

<SNIP>

A first response from TC Electronic via a moderator named 'TC-Mike' is that
the ability to backup the device is 'on the roadmap'.

I asked about general timeframe but have received no response.

Cheers,
Mark

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@lists.linuxaudio.org
https://lists.linuxaudio.org/listinfo/linux-audio-dev
Received on Fri May 29 04:15:02 2020

This archive was generated by hypermail 2.1.8 : Fri May 29 2020 - 04:15:02 EEST