[linux-audio-user] Spiral Synth and MusE

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: [linux-audio-user] Spiral Synth and MusE
From: Bill Allen (ballen_AT_mail.serve.com)
Date: Wed Apr 24 2002 - 19:53:43 EEST

This is a similar question to that which Dave Phillips asked about
RTSynth. I want MusE to drive SS. I assume that since SS uses /dev/midi as
input that I need to use aconnect to connect one of the virmidi outputs to
the midi input, then set a track on muse to output to the virmidi port.

My ports are:

[bill_AT_localhost music]$ aconnect -lo
client 64: 'External MIDI 0' [type=kernel]
    0 'MIDI 0-0 '
client 65: 'OPL3 FM synth' [type=kernel]
    0 'OPL3 Port '
client 72: 'Virtual Raw MIDI 1-0' [type=kernel]
    0 'VirMIDI 1-0 '
client 73: 'Virtual Raw MIDI 1-1' [type=kernel]
    0 'VirMIDI 1-1 '
client 74: 'Virtual Raw MIDI 1-2' [type=kernel]
    0 'VirMIDI 1-2 '
client 75: 'Virtual Raw MIDI 1-3' [type=kernel]
    0 'VirMIDI 1-3 '
[bill_AT_localhost music]$ aconnect -li
client 0: 'System' [type=kernel]
    0 'Timer '
    1 'Announce '
        Connecting To: 63:0
client 64: 'External MIDI 0' [type=kernel]
    0 'MIDI 0-0 '
client 72: 'Virtual Raw MIDI 1-0' [type=kernel]
    0 'VirMIDI 1-0 '
client 73: 'Virtual Raw MIDI 1-1' [type=kernel]
    0 'VirMIDI 1-1 '
client 74: 'Virtual Raw MIDI 1-2' [type=kernel]
    0 'VirMIDI 1-2 '
client 75: 'Virtual Raw MIDI 1-3' [type=kernel]
    0 'VirMIDI 1-3 '

But when I aconnect 72:0 64:0, I can't start SpiralSynth. If I start
SpiralSynth first, then I can't do the aconnect. I've got to be seriously
confused about how things work, or something is wrong with my setup - I'm
betting (and hoping) on the former.

Bill

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Wed Apr 24 2002 - 19:41:28 EEST