Subject: Re: [linux-audio-user] ppc alsa audacity
From: Patrick Shirkey (pshirkey_AT_boosthardware.com)
Date: Wed Nov 20 2002 - 19:58:44 EET
Emiliano Grilli wrote:
> Patrick Shirkey <pshirkey_AT_boosthardware.com> ha scritto:
>
>>try -d hw:0
>
>
> Same result :'-(
>
> However, if I don't specify sample rate I get:
> ________________________________________________
> jackd 0.40.1
> Copyright 2001-2002 Paul Davis and others.
> jackd comes with ABSOLUTELY NO WARRANTY
> This is free software, and you are welcome to redistribute it
> under certain conditions; see the file COPYING for details
>
> loading driver ..
> creating alsa driver ... hw:0|1024|2|48000|swmon
> Sorry. The audio interface "hw:0"doesn't support either of the two hardware
> sample formats that jack can use. ALSA: cannot configure capture channel
> cannot load driver module alsa
> jack main caught signal 15
> __________________________________________________
>
> So I suspect that I have to see "creating alsa driver ...
> hw:0|1024|2|44100|swmon" when I specify -r44100, but output stops at
> "loading driver .."
>
Is this with the imic?
It occurs to me that you should only be using capture with JACK.
ie. jackd -v -d alsa -d hw:0 -C
Otherwise if the device can support duplex operation you should contact
the alsa-devel list with details AFAIK all modern devices support 44100.
-- Patrick Shirkey - Boost Hardware Ltd. For the discerning hardware connoisseur http://www.boosthardware.com http://www.djcj.org - The Linux Audio Users guide ========================================Being on stage with the band in front of crowds shouting, "Get off! No! We want normal music!", I think that was more like acting than anything I've ever done.
Goldie, 8 Nov, 2002 The Scotsman
This archive was generated by hypermail 2b28 : Wed Nov 20 2002 - 20:16:54 EET