Subject: [linux-audio-user] newbie question about a Delta 1010LT card
From: Akos Maroy (darkeye_AT_tyrell.hu)
Date: Sun Jun 08 2003 - 18:59:38 EEST
Hi,
I just installed a Delta 1010LT multi-channel audio card into my PC. I'm
new to multi channel cards, and have some questions. I'm sorry if these
questions are dull or simple.
I just installed alsa 0.9.4, as described on the page
http://www.alsa-project.org/alsa-doc/doc-php/template.php3?company=Midiman&card=Delta+1010-LT&chip=Envy24&module=ice1712
all modules seem to load fine.
I have the following questions:
- mixer
I can also run alsamixer and env24control, but I can't run aumix or
other mixers that would use the OSS mixer interface. maybe the alsa ->
OSS mixer interface is not configured properly, as:
# cat /proc/asound/card0/oss_mixer
VOLUME "" 0
BASS "" 0
TREBLE "" 0
SYNTH "" 0
PCM "" 0
SPEAKER "" 0
LINE "" 0
MIC "" 0
CD "" 0
IMIX "" 0
ALTPCM "" 0
RECLEV "" 0
IGAIN "" 0
OGAIN "" 0
LINE1 "" 0
LINE2 "" 0
LINE3 "" 0
DIGITAL1 "" 0
DIGITAL2 "" 0
DIGITAL3 "" 0
PHONEIN "" 0
PHONEOUT "" 0
VIDEO "" 0
RADIO "" 0
MONITOR "" 0
- accessing the multiple input channels as separate OSS devices
actually the main goal of having this card is to be able to record
parallelly from the separate input channels it has. recording would be
done through opening and reading OSS-style /dev/dsp devices.
is this possible using this card and alsa drivers? if so, how? is this
related to /etc/asound.conf ?
all help would be appreciated,
Akos
This archive was generated by hypermail 2b28 : Sun Jun 08 2003 - 19:03:56 EEST