Subject: [linux-audio-user] Re: HDSP Firmware
From: BrbrOfSvl_AT_aol.com
Date: Sun Sep 21 2003 - 20:58:24 EEST
Thanks for your suggestions...
When I run "alsaconf" it finds the HDSP just fine, but when it tries to bring up the volume, I get this message:
Starting sound driver snd-hdsp Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: init_module: No such device
/lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: insmod /lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o failed
/lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: insmod snd-hdsp failed
[FAILED]
Starting sequencer [ OK ]
Restoring sound driver settings /usr/sbin/alsactl: load_state:1121: No soundcards found...
[FAILED]
After that an lsmod shows no snd-hdsp. Any idea what could cause this or how to go about solving it?
Thanks,
Matt Barber
This archive was generated by hypermail 2b28 : Sun Sep 21 2003 - 21:17:08 EEST