Subject: Re: [linux-audio-user] Help with basic midi configuration
From: Robert Jonsson (robert.jonsson_AT_dataductus.se)
Date: Mon Dec 01 2003 - 11:45:02 EET
Hi,
tim hall wrote:
> On Monday 01 December 2003 06:11, Eduardo Guerrero wrote:
>
>
>>In my MusE Midi Port Table I have port 1, generic midi, going to the
>>device EMU10K1 MPU-401 (UART) and the state shows as OK. Trying with
>>different settings I have seen a message about DEVICE PLAYING or similar
>>but can't remember what I did.
>
>
> It sounds like you're sending MIDI to an external device. I wish you knew how
> you did this so you could tell me how to do it. You need to load a softsynth
> and if it's iiwu you need to load up a soundfont before you'll hear anything
> off your soundcard.
Ahh, you are quite right, sloppy reading on my part. "EMU10K1 MPU-401
(UART)" is indeed the external port on the Live card. You need an
external synth to get any sound out of that.
Either do as Tim suggests and load an internal softsynth of MusE and set
the output to that or change the output port to one of the SB-Live synth
channels and load a soundfont with sfxload.
As for your question Tim, I didn't quite follow what it was you didn't
get to work?
/Robert
This archive was generated by hypermail 2b28 : Mon Dec 01 2003 - 11:45:41 EET