Re: [linux-audio-user] sampling at high frequencies

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: Re: [linux-audio-user] sampling at high frequencies
From: Jan Depner (eviltwin69_AT_cableone.net)
Date: Mon Jan 26 2004 - 15:56:05 EET


AFAIK the only reason for going to 96KHz is to allow for digital effects
processing to do a better job. Maybe some people can hear a difference
on *very* expensive equipment but eventually you have to go to 16 bit
44.1KHz ;-)

Jan

 On Mon, 2004-01-26 at 03:19, Joern Nettingsmeier wrote:
> Florin Andrei wrote:
> > Anyone here using 192kHz for sampling?
> >
>
> are you trying to record for dogs or bats ? ;)
>
> seriously, the only measurably effect of 192k is that it fills up your
> disks faster and eats more cpu when processing.
>
> imnsho, all this sampling rate hype is a clever industry ploy to keep
> people from thinking that their hardware is finally good enough and they
> can stop buying now.
>
> people can't hear over 20k. period. 48k sampling rate gives you 24k
> minus what's cropped off by the aliasing filter. granted, higher
> sampling allows you to use a simpler, less steep aliasing filter, and
> some people claim to perceive an improvement from that. but even then,
> 96k should be enough.
>
>
> --
> "I never use EQ, never, never, never. I previously used to use mic
> positioning but I've even given up on that too."
> - Jezar on http://www.audiomelody.com
>
>
> Jörn Nettingsmeier
> Kurfürstenstr 49, 45138 Essen, Germany
> http://spunk.dnsalias.org (my server)
> http://www.linuxaudiodev.org (Linux Audio Developers)
>
>
>
>


New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Mon Jan 26 2004 - 15:56:14 EET