[linux-audio-user] Re:UPDATE insmod errors - rme hammerfall multiface UPDATE

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: [linux-audio-user] Re:UPDATE insmod errors - rme hammerfall multiface UPDATE
From: rob canning (rscanning_AT_eircom.net)
Date: Wed Feb 04 2004 - 20:53:10 EET

hi again,

here are some revised details of my problem!

i am actually running the planetccrma kernel 2.4.20-18.1.caps

when running alsaconf i get:
[root_AT_localhost robcanning]# /usr/sbin/alsaconf
/usr/sbin/alsaconf: line 120: modinfo: command not found
/usr/sbin/alsaconf: line 127: modinfo: command not found
/usr/sbin/alsaconf: line 135: modinfo: command not found

then it finds:
  hdsp Xilinx Corporation RME Hammerfall DSP (rev 32) │ │
 │ │ intel8x0 Intel Corp. 82801EB AC'97 Audio (rev
02) │ │
 │ │ legacy Probe legacy ISA (non-PnP) chips

then it configures snd-hdsp and runs alsasound start at which point
things go wrong:
Loading driver...
Starting sound driver: snd-hdsp
/lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: insmod
/lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o failed
/lib/modules/2.4.20-18.1.caps/kernel/sound/snd-hdsp.o: insmod snd-hdsp
failed
done
Setting default volumes...
===============================================================================
                                                                                
 Now ALSA is ready to use.
 For adjustment of volumes, use your favorite mixer.
                                                                                
 Have a lot of fun!

more info:
03:0c.0 Multimedia audio controller: Xilinx Corporation RME Hammerfall
DSP (rev
32)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at feae0000 (32-bit, non-prefetchable)
[size=64K]

[root_AT_localhost robcanning]# dmesg
mory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found
Hammerfall memory allocator: buffers allocated for 1 cards
RME Hammerfall-DSP: no cards found

which is then repeated a number of times

thanks,

rob

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Wed Feb 04 2004 - 20:57:51 EET