[linux-audio-user] rme hamerfall setup - pd hangs then quits was UPDATE insmod errors - rme hammerfall multiface UPDATE

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: [linux-audio-user] rme hamerfall setup - pd hangs then quits was UPDATE insmod errors - rme hammerfall multiface UPDATE
From: rob canning (rscanning_AT_eircom.net)
Date: Sat Feb 07 2004 - 01:56:35 EET

hi and thanks for the help so far!,

the hdsp module is loaded /sbin/lsmod:
snd-hdsp 46732 0 (autoclean)

cat /proc/asound/cards
0 [default ]: H-DSP - Hammerfall DSP
                     RME Hammerfall DSP + Multiface at 0xfeae0000, irq 5

the motherboards intel sound chip has now disappeared but thats ok...

i ran alsaconf again and now and everything seems a lot healthier
the hdsploader works (the red Host light is now off) as does hdspconf and hdspmixer

so everything looks fine but when i start pd it hangs for about 20 seconds and then outputs the following errors, then quits.

input channels = 2, output channels = 2
device name hw:0; channels in 2, out 2
audio buffer set to 50
opening sound input...
using non-interleaved audio input
Sample width set to 4 bytes
ALSA: set input channels to 14
ALSA lib pcm_hw.c:324:(snd_pcm_hw_hw_params) SNDRV_PCM_IOCTL_HW_PARAMS failed: Device or resource busy
snd_pcm_hw_params (input): Device or resource busy
pd: pcm.c:4887: snd_pcm_sw_params_current: Assertion `pcm->setup' failed.
Pd: signal 6
socket receive error: Connection reset by peer (104)
Aborted

sorry about this!

rob

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Sat Feb 07 2004 - 01:56:31 EET