Subject: Re: [linux-audio-user] IBM Thinkpad r50 with RME Hammerfall Cardbus
From: D R Holsbeck (drh_AT_niptron.com)
Date: Wed Apr 28 2004 - 20:17:33 EEST
I have never had an issue with my A31. And I use the RME cardbus
interface, and a 2.4.20 LL kernel. Havent had time to try the 2.6s yet.
On Wed, 2004-04-28 at 11:44, Greg Reddin wrote:
> This may or may not be relevant, but I had a T20 for a while and
> after I installed lowlat kernel the PCMCIA network card quit working.
> I was never able to get PCMCIA to work correctly with a lowlat
> kernel. I eventually moved off the T20 and quit thinking about it.
>
> Greg
>
> --- Dan Harper <tech_AT_danharper.org> wrote:
> > Ahhh, stress! OK, I've researched so much my head hurts.
> > I want to buy a notebook for a DAW using Linux, so far I've come
> > to:
> >
> > IBM ThinkPad R50 (1.6 Centrino, 1Gb RAM)
> > RME Hammerfall Multiface w/ Cardbus
> >
> > I want to be using Ardour and Jack with low latency, no xruns, etc.
> >
> > Can anyone see any problems with this setup?
> >
> > PS: I've also looked at:
> > - Edirol UA-1000 - Problems: USB, Not tested with Linux
> > - Echo Layla24 Cardbus - Problems: Linux Driver for Cardbus not
> > working
> >
> > Thanks,
> > Dan
> >
> >
>
>
>
>
>
> __________________________________
> Do you Yahoo!?
> Win a $20,000 Career Makeover at Yahoo! HotJobs
> http://hotjobs.sweepstakes.yahoo.com/careermakeover
-- drh_AT_niptron.com"It says he made us all to be just like him. So if we're dumb, then god is dumb, and maybe even a little ugly on the side." -- Frank Zappa
This archive was generated by hypermail 2b28 : Wed Apr 28 2004 - 20:12:59 EEST