Subject: Re: [linux-audio-user] Yamaha UX-256
From: §t3 (step16_AT_interfree.it)
Date: Wed May 26 2004 - 13:47:16 EEST
I only have the usb-midi module, not the snd-usb-midi...I'll try to
download and compile it. I'm not using hotplug, by now I always loaded
everything manually by adding it in my /etc/rc.d/rc.modules file over
Slackware and everything (except the ux256) has worked smoothly. I'll
try it. Thanks and...ciao!
On Wed, 2004-05-26 at 12:15, Emiliano Grilli wrote:
> mercoledì, 26 maggio 2004 alle 11:53:46, §t3 ha scritto:
> > Hi everybody! I'm using Slackware 9.1 with Kernel 2.4.26 patched for
> > low-latency.
> > Everything is ok, only my usb-midi multiport Yamaha UX256 isn't working.
> > I've loaded the usb modules (I use also an usb joypad and a pendrive and
> > they work), I've loaded the usb-midi module and at boot time it
> > recognizes the UX256 and displays the following kernel messages:
>
> usb-midi is the OSS module, you have to load the snd-usb-audio module,
> which is part of ALSA.
>
> > But if I run Jack i can't see it...my UX256 isn't avaible in any apps.
>
> Jack is an audio server, AFAIK for now it knows nothing about MIDI (even if
> qjackctl has a facility MIDI-tab under "setup"). I know that MIDI trough
> jack is planned, but I guess it will use ALSA as driver.
>
> > I know it should work beacause I tried with Demudi (www.agnula.org)
> > and it works.
> > I've also recompiled alsa (1.0.4) but nothing to do...
>
> Try the snd-usb-audio module, and put these lines into
> /etc/hotplug/blacklist:
>
> usb-midi
> snd-usb-audio
>
> > Any suggestions? I've tried everything I was able to, i've been Googlin'
> > but no usefull info. If someone has...THANKS!
>
> HTH ciao
-- =====>§t3<=====
This archive was generated by hypermail 2b28 : Wed May 26 2004 - 13:37:34 EEST