### This file is automatically generated by update-modules" # # Please do not edit this file directly. If you want to change or add # anything please take a look at the files in /etc/modutils and read # the manpage for update-modules. # ### update-modules: start processing /etc/modutils/0keep # DO NOT MODIFY THIS FILE! # This file is not marked as conffile to make sure if you upgrade modutils # it will be restored in case some modifications have been made. # # The keep command is necessary to prevent insmod and friends from ignoring # the builtin defaults of a path-statement is encountered. Until all other # packages use the new `add path'-statement this keep-statement is essential # to keep your system working keep ### update-modules: end processing /etc/modutils/0keep ### update-modules: start processing /etc/modutils/actions # Special actions that are needed for some modules # The BTTV module does not load the tuner module automatically, # so do that in here post-install bttv insmod tuner post-remove bttv rmmod tuner ### update-modules: end processing /etc/modutils/actions ### update-modules: start processing /etc/modutils/aliases # Aliases to tell insmod/modprobe which modules to use # Uncomment the network protocols you don't want loaded: # alias net-pf-1 off # Unix # alias net-pf-2 off # IPv4 # alias net-pf-3 off # Amateur Radio AX.25 # alias net-pf-4 off # IPX # alias net-pf-5 off # DDP / appletalk # alias net-pf-6 off # Amateur Radio NET/ROM # alias net-pf-9 off # X.25 # alias net-pf-10 off # IPv6 # alias net-pf-11 off # ROSE / Amateur Radio X.25 PLP # alias net-pf-19 off # Acorn Econet alias char-major-10-175 agpgart alias char-major-10-200 tun alias char-major-81 bttv alias char-major-108 ppp_generic alias /dev/ppp ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate # Crypto modules (see http://www.kerneli.org/) alias loop-xfer-gen-0 loop_gen alias loop-xfer-3 loop_fish2 alias loop-xfer-gen-10 loop_gen alias cipher-2 des alias cipher-3 fish2 alias cipher-4 blowfish alias cipher-6 idea alias cipher-7 serp6f alias cipher-8 mars6 alias cipher-11 rc62 alias cipher-15 dfc2 alias cipher-16 rijndael alias cipher-17 rc5 ### update-modules: end processing /etc/modutils/aliases ### update-modules: start processing /etc/modutils/alsa-base above snd-pcm snd-pcm-oss # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF verion 1.0.5 --- alias char-major-116 snd alias char-major-14 soundcore alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss options snd device_mode=0660 alias snd-card-0 snd-via82xx alias sound-slot-0 snd-via82xx # --- END: Generated by ALSACONF, do not edit. --- ### update-modules: end processing /etc/modutils/alsa-base ### update-modules: start processing /etc/modutils/alsa-base.old above snd-pcm snd-pcm-oss # --- BEGIN: Generated by ALSACONF, do not edit. --- # --- ALSACONF verion 1.0.5 --- alias char-major-116 snd alias char-major-14 soundcore alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss options snd device_mode=0660 alias snd-card-0 snd-emu10k1 alias sound-slot-0 snd-emu10k1 # --- END: Generated by ALSACONF, do not edit. --- ### update-modules: end processing /etc/modutils/alsa-base.old ### update-modules: start processing /etc/modutils/alsa-path # Debian ALSA modules path # Do not edit this unless you understand what you're doing. path=/lib/modules/`uname -r`/alsa ### update-modules: end processing /etc/modutils/alsa-path ### update-modules: start processing /etc/modutils/apm alias char-major-10-134 apm alias /dev/apm_bios /dev/misc/apm_bios alias /dev/misc/apm_bios apm ### update-modules: end processing /etc/modutils/apm ### update-modules: start processing /etc/modutils/dvdplusrw options ide-cd ignore=hdd alias scd0 sr_mod pre-install sg modprobe ide-scsi pre-install sr_mod modprobe ide-scsi pre-install ide-scsi modprobe ide-cd ### update-modules: end processing /etc/modutils/dvdplusrw ### update-modules: start processing /etc/modutils/kudzu alias snd-card-1 snd-emu10k1 install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && /usr/sbin/alsactl restore >/dev/null 2>&1 || : remove snd-emu10k1 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-emu10k1 ### update-modules: end processing /etc/modutils/kudzu ### update-modules: start processing /etc/modutils/linux-wlan-ng # Aliases to tell insmod/modprobe which module to use when bringing up the # wlan0 interface. # Uncomment the line corresponding to the type of prism2 device you have. #alias wlan0 prism2_pci alias wlan0 prism2_usb #alias wlan0 prism2_cs #alias wlan0 prism2_plx ### update-modules: end processing /etc/modutils/linux-wlan-ng ### update-modules: start processing /etc/modutils/paths # This file contains a list of paths that modprobe should scan, # beside the ones that are compiled into the modutils tools # themselves. ### update-modules: end processing /etc/modutils/paths ### update-modules: start processing /etc/modutils/ppp alias /dev/ppp ppp_generic alias char-major-108 ppp_generic alias tty-ldisc-3 ppp_async alias tty-ldisc-14 ppp_synctty alias ppp-compress-21 bsd_comp alias ppp-compress-24 ppp_deflate alias ppp-compress-26 ppp_deflate ### update-modules: end processing /etc/modutils/ppp ### update-modules: start processing /etc/modutils/setserial # # This is what I wanted to do, but logger is in /usr/bin, which isn't loaded # when the module is first loaded into the kernel at boot time! # #post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload" #pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload" # alias /dev/tts serial alias /dev/tts/0 serial alias /dev/tts/1 serial alias /dev/tts/2 serial alias /dev/tts/3 serial post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null pre-remove serial /etc/init.d/setserial modsave > /dev/null 2> /dev/null ### update-modules: end processing /etc/modutils/setserial ### update-modules: start processing /etc/modutils/arch/i386 alias parport_lowlevel parport_pc alias char-major-10-144 nvram alias binfmt-0064 binfmt_aout alias char-major-10-135 rtc ### update-modules: end processing /etc/modutils/arch/i386