Subject: Re: [linux-audio-user] 8 oscillator ecasynth
From: Steve Harris (S.W.Harris_AT_ecs.soton.ac.uk)
Date: Thu Sep 02 2004 - 12:21:14 EEST
On Wed, Sep 01, 2004 at 08:35:00PM -0400, Eric Dantan Rzewnicki wrote:
> 1) the analogueOsc has a control for selecting waveform. The above set
> up statically sets it to Sine. It seems like I should be able to switch
> between the 4 waveforms interactively. But, when I set up one of the
> assignable buttons on the remote25 to step through values 1-4 and
> attached it to the waveform control of the plugin I didn't get any
> change. Is this paramater only controllable when the plugin is first
> instantiated?
Shouldn't be, theres nthig special about the first run.
> 3) possibly related to 2) ... There are artifacts and glitches in the
> sound output. I'm not sure what to call them ... just a sort of scratchy
> sound when I move the controllers. I'm not sure if this is xrun related
> or not. Could it be something in the plugin itself? I'm not sure how to
> sort out where the issue is.
Yes, its probably in the plugin, its often called "zipper noise" (it
sounds like someone dragging a zip), if it is that I will fix it.
- Steve
This archive was generated by hypermail 2b28 : Thu Sep 02 2004 - 12:25:43 EEST