Re: [linux-audio-user] How to enable 88.1KHz and above sampling rate on HDSP/Multiface+Jack?

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: Re: [linux-audio-user] How to enable 88.1KHz and above sampling rate on HDSP/Multiface+Jack?
From: Dan Harper (tech_AT_danharper.org)
Date: Wed Nov 10 2004 - 00:28:15 EET


Hi there,

Hopefully this helps (from my site
http://danharper.org/Linux_on_the_IBM_ThinkPad_R50.html):

> Thomas Charbonnel has tipped me off to a way to enable 96kHz on the
> RME HDSP, I haven't tested it yet, but I know Thomas is very
> knowledgeable on HDSP issues:
>
> Hi Dan,
>
> I read on your page you had problems using the hdsp at 96kHz. To do
> so you have to switch to double speed mode (i.e. to a sample
> rate > 48khz) manually before opening the desired app. You can do
> this either graphically with hdspconf (part of alsa-tools) or on the
> command line
> using amixer :
> amixer -c X cset numid=11 Y
> where X is your hdsp's alsa card number and Y the rate needed
> (6 is 96kHz).
>
> Thomas

Dan

On Tue, 2004-11-09 at 14:07 -0500, Ivica Ico Bukvic wrote:
> Hi all,
>
> I guess the title says it all. I was wondering if there was a button or
> something that would enable this using perhaps a hdspmixer or something
> similar or perhaps passing appropriate setting via alsa mixer?
>
> On my setup jack always fails with anything above 48KHz.
>
> Best wishes,
>
> Ivica Ico Bukvic, composer & multimedia sculptor
> http://meowing.ccm.uc.edu/~ico/
>
>
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.788 / Virus Database: 533 - Release Date: 11/1/2004
>
>
>
>

-- 
Dan Harper
http://danharper.org


New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Wed Nov 10 2004 - 00:33:06 EET