Subject: Re: [linux-audio-user] Midisport 8x8 - firmware not loading; is my guess
From: Marije Baalman (lists_AT_nescivi.de)
Date: Sun Nov 14 2004 - 22:59:44 EET
Hi,
I had a similar problem with the MidiSport 2x2
I discovered that doing a reboot somehow gets the thing working (the
usb-LED on the device starts burning during the boot, and the device
runs fine afterwards).
I do not know why though.
sincerely,
Marije
Sunday, November 14, 2004, 9:42:54 PM, you wrote:
BF> I asked this question on the ALSA user's list with no response (yet!)
BF> Thought maybe someone on this group may have come across this.
BF> Can't get midisport8x8 to work. I think that the firmware is not loading.
BF> Some notes:
BF> ---
BF> I have usbfs running (the dir is there), installed the hotplug and
BF> fxload packages from linux-hotplug and "make install" the
BF> midisport_firmware-0.5.
BF> ---
BF> modprobe:
BF> ================================
BF> # --- ALSA configuration
BF> alias char-major-116 snd
BF> alias char-major-14 soundcore
BF> alias snd-card-0 snd-ice1712
BF> alias snd-card-1 snd-usb-audio
BF> # OSS/Free portion
BF> alias sound-slot-0 snd-card-0
BF> # card #1 (Delta 66)
BF> alias sound-service-0-0 snd-mixer-oss
BF> alias sound-service-0-1 snd-seq-oss
BF> alias sound-service-0-3 snd-pcm-oss
BF> alias sound-service-0-8 snd-seq-oss
BF> alias sound-service-0-12 snd-pcm-oss
BF> # card #2 (midipsort 8x8)
BF> alias sound-slot-1 snd-card-1
BF> ================================
BF> ---
BF> cat /proc/asound/cards shows just my Delta66 card.
BF> ---
BF> cat /proc/bus/usb/devices shows just info on the two USB controllers
BF> (as does lsusb)
BF> ---
BF> lsmod (relevant)"
BF> =====================================
BF> Module Size Used by
BF> snd_pcm_oss 54312 0
BF> snd_mixer_oss 18432 2 snd_pcm_oss
BF> realcap 4240 0
BF> commoncap 4736 1 realcap
BF> snd_seq 50576 8
BF> snd_usb_audio 67680 0
BF> snd_ice1712 63688 5
BF> snd_ice17xx_ak4xxx 4224 1 snd_ice1712
BF> snd_pcm 85128 5
BF> snd_pcm_oss,snd_usb_audio,snd_ice1712
BF> snd_page_alloc 11016 1 snd_pcm
BF> snd_timer 23684 2 snd_seq,snd_pcm
BF> snd_ak4xxx_adda 5760 2 snd_ice1712,snd_ice17xx_ak4xxx
BF> snd_cs8427 10880 1 snd_ice1712
BF> snd_ac97_codec 63748 1 snd_ice1712
BF> snd_i2c 5248 2 snd_ice1712,snd_cs8427
BF> snd_mpu401_uart 7680 1 snd_ice1712
BF> snd_rawmidi 23076 2 snd_usb_audio,snd_mpu401_uart
BF> snd_seq_device 8200 2 snd_seq,snd_rawmidi
BF> snd 54532 23
BF> snd_pcm_oss,snd_mixer_oss,snd_seq,snd_usb_audio,snd_ice1712,snd_ice17xx_ak4xxx,snd_pcm,snd_timer,snd_ak4xxx_adda,snd_cs8427,snd_ac97_codec,snd_i2c,snd_mpu401_uart,snd_rawmidi,snd_seq_device
BF> soundcore 6496 2 snd
BF> =====================================
BF> Midisport does not show up anywhere. So, I fear that fxload and/or
BF> hotplug scripts are not working.
BF> How can I check this? And, how can I enable these to work (if this is
BF> the problem)?
BF> thanks much!
BF> brad
--
This archive was generated by hypermail 2b28 : Sun Nov 14 2004 - 23:04:07 EET