Re: [linux-audio-user] How to of Recording on Ardour and connecting Ardour/JAmin together for MAstering Audio

New Message Reply About this list Date view Thread view Subject view Author view Other groups

Subject: Re: [linux-audio-user] How to of Recording on Ardour and connecting Ardour/JAmin together for MAstering Audio
From: Jack O'Quin (joq_AT_io.com)
Date: Wed Dec 15 2004 - 18:09:39 EET

> On Tue, 2004-12-14 at 11:33, ish_AT_sarai.net wrote:
> > Hi every one ... i ve witten a kind of a rough How-to(Draft) for initial
> > recording using Ardour... and using JAmin along with it via JACK(jackd).
> > This was primarily go give a basic how to of intial acoustic recording.
> > And how a mastering software, which in this case is JAmin can be used to
> > tweak the recording to produce a well spaced/MAstered
> > recording...(Basically to achive the stuff in youe head) . Well this is
> > just a start... and any input from your side will be helpful... so please
> > check out the following site ...
> >
> > http://users.sarai.net/~ish/contents.html

Nice, helpful writeup. I did notice a significant error you might
want to correct, however.

On this page...

  http://users.sarai.net/~ish/Exporting_audio.html

Your example checks *both* Left and Right stereo channels when
exporting Audio 3:out-1 and Audio 3:out-2 to a WAV file. I believe
this gives "mono" output in a stereo file (in the sense that both
channels will be the same). I recommend checking Left for Audio
3:out-1 and Right for Audio 3:out-2. That will render the stereo
outputs from JAMin correctly. 

-- 
  joq

New Message Reply About this list Date view Thread view Subject view Author view Other groups

This archive was generated by hypermail 2b28 : Wed Dec 15 2004 - 18:12:19 EET