Erik Thorsson wrote:
> yew:~# cat /proc/bus/usb/devices
> ...
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=00 Driver=snd-usb-audio
> ...
So the correct driver is loaded. The ports should appear in the
output of "amidi -l".
> yew:~# cat /proc/modules | grep snd_seq_midi
> snd_seq_midi_event ...
> ...
snd-seq-midi is _not_ loaded. Try "modprobe snd-seq-midi".
This was a bug in some old ALSA version. Either running the modprobe
command at startup or updating to ALSA 1.0.8 should help.
HTH
Clemens
Received on Fri Jan 21 20:15:34 2005
This archive was generated by hypermail 2.1.8 : Fri Jan 21 2005 - 20:15:35 EET