Re: [linux-audio-user] audiophile 2496 with Fedora Core 3

From: Michael Mossey <mpm@email-addr-hidden>
Date: Mon Apr 18 2005 - 07:24:18 EEST

Thanks Tracey and Lee! Sounds like the right track.. I will let you know
how it goes...

-Mike

----- Original Message -----
From: "Tracey Hytry" <shakti@email-addr-hidden>
To: "A list for linux audio users" <linux-audio-user@email-addr-hidden>
Sent: Sunday, April 17, 2005 7:43 PM
Subject: Re: [linux-audio-user] audiophile 2496 with Fedora Core 3

>> > Hmm, when I went to the Planet CCRMA website, it said "Install Fedora
>> > Core
>> > 3. You should now have a properly configured and working sound card.
>> > Then install the CCRMA sound applications." What's wrong with this
>> > picture is that I don't have a properly configured and working sound
>> > card
>> > after doing the Fedora Core 3 install. It didn't recognize my
>> > Audiophile
>> > 2496 as far as I can tell--it configured the onboard sound. Can you
>> > tell
>> > me more specifically what you did to get the Audiophile 2496 working?
>>
>> Just disable the onboard sound in the BIOS before you install.
>>
>
> An easy way to pick up the pieces from where you are is to:
>
> Save /etc/modprobe.conf and leave a version of modprobe.conf that has the
> sound stuff edited out.
>
> Go to /etc/sysconfig /etc/sysconfig/hwconf and do the same.
>
> Shut down the machine and put in the audiophile if it's not already in.
>
> Turn the machine back on and go directly to the bios and turn off the
> on-board sound that came with the motherboard.
>
> Boot back into FC3 and let kudzu do it's thing (let it configure the new
> sound card).
>
> Kudzu will have written new data to both of the above two files for the
> audiophile.
>
> Save each of the new files for later.
>
> Reboot the machine again and turn back on the on-board sound via the bios.
>
> Boot FC3 again and if redhat's problem child dosen't see and configure the
> onboard sound into the system, you now have the data to merge it in
> yourself.
>
> Please refer to the planet ccrma site to setup your modprobe.conf for two
> cards if you can.
>
> http://ccrma.stanford.edu/planetccrma/software/installtwosix.html
>
> Good luck!
>
Received on Mon Apr 18 08:15:07 2005

This archive was generated by hypermail 2.1.8 : Mon Apr 18 2005 - 08:15:07 EEST