CC-Band wrote:
> but i cannot connect the card to alsa ... :-(
>
> alsactl restore says: cannot get state of E26
This is OK if you've never saved the E26's mixer state before.
> fimware loader: probe of 1-2:1.0 failed with error -5 (what does it mean?)
> but then: registered new driver emi26 ?? ... ??
>
> lsusb now sais: Bus 001 Device 003: ID 086a:0101 Emagic Soft-und Hardware GmbH
> (why not 086a:0102 ?)
After the firmware has been downloaded, the device disconnects itself
and then reconnects as an USB audio device with ID 0101.
"error -5" indicates that the firmware loader (the emi26 module)
doesn't want to stay loaded because it isn't needed anymore after the
firmware has been loaded.
> loaded modules are audio and snd-usb-audio
To prevent the audio module from loading, put the line
audio
into the /etc/hotplug/blacklist file.
HTH
Clemens
Received on Wed May 18 12:15:07 2005
This archive was generated by hypermail 2.1.8 : Wed May 18 2005 - 12:15:07 EEST