Hi
I have just installed a clean FC3 and added the apt-get planet CCRMA
stuff.
My M-Audio doesn't seem to be playing, I'm trying to use the spdiff in
and out only.
I have tried to load and install the envy24control but not sure where to
put it, and the install script fails.
I can run ardour as root only and it seems jack is running as root.
Her is output from lspci:
***************************************************************************************
[root@email-addr-hidden-1 ~]# clear
[root@email-addr-hidden-1 ~]# lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host
Bridge
Subsystem: ASRock Incorporation: Unknown device 3156
Flags: bus master, 66Mhz, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
(prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: cdd00000-ddcfffff
Capabilities: [80] Power Management version 2
00:0b.0 Multimedia audio controller: VIA Technologies Inc. ICE1712
[Envy24] PCI Multi-Channel I/O Controller (rev 02)
Subsystem: VIA Technologies Inc.: Unknown device d634
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at ec00 [size=32]
I/O ports at e800 [size=16]
I/O ports at e400 [size=16]
I/O ports at e000 [size=64]
Capabilities: [80] Power Management version 1
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
Flags: bus master, medium devsel, latency 32, IRQ 3
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
Flags: bus master, medium devsel, latency 32, IRQ 5
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if
20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: ASRock Incorporation K7VT2 motherboard
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-
if 8a [Master SecP PriP])
Subsystem: ASRock Incorporation K7VT2 motherboard
Flags: bus master, medium devsel, latency 32, IRQ 255
I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II]
(rev 74)
Subsystem: ASRock Incorporation: Unknown device 3065
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at d000 [size=256]
Memory at dffffe00 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX
5200] (rev a1) (prog-if 00 [VGA])
Subsystem: CardExpert Technology: Unknown device 0431
Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 11
Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at dfee0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
[root@email-addr-hidden-1 ~]#
****************************************************************
[root@email-addr-hidden-1 ~]# /sbin/lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] Host
Bridge
Subsystem: ASRock Incorporation: Unknown device 3156
Flags: bus master, 66Mhz, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
(prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: cdd00000-ddcfffff
Capabilities: [80] Power Management version 2
00:0b.0 Multimedia audio controller: VIA Technologies Inc. ICE1712
[Envy24] PCI Multi-Channel I/O Controller (rev 02)
Subsystem: VIA Technologies Inc.: Unknown device d634
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at ec00 [size=32]
I/O ports at e800 [size=16]
I/O ports at e400 [size=16]
I/O ports at e000 [size=64]
Capabilities: [80] Power Management version 1
********************************************************************************
Here is output from starting Ardour as user:
*********************************************************************************
Ardour/GTK 0.9beta29
(built using 0.589.2 with libardour 0.887.1)
Copyright (C) 1999-2005 Paul Davis
Some portions Copyright (C) Steve Harris, Ari Johnson, Brett Viren, Joel
Baker
Ardour comes with ABSOLUTELY NO WARRANTY
not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
This is free software, and you are welcome to redistribute it
under certain conditions; see the source for copying conditions.
Loading UI configuration file /etc/ardour/ardour_ui.rc
jackstart: cannot get realtime capabilities, current capabilities are:
=ep cap_setpcap-ep
probably running under a kernel with capabilities disabled,
a suitable kernel would have printed something like "=eip"
back from read, ret = 1 errno == Success
jackstart: could not give capabilities: Operation not permitted
jackd 0.99.36
Copyright 2001-2003 Paul Davis and others.
jackd comes with ABSOLUTELY NO WARRANTY
This is free software, and you are welcome to redistribute it
under certain conditions; see the file COPYING for details
JACK compiled with System V SHM support.
cannot lock down memory for jackd (Cannot allocate memory)
loading driver ..
creating alsa driver ... hw:0|hw:0|512|2|48000|0|0|nomon|swmeter|-|32bit
control device hw:0
configuring for 48000Hz, period = 512 frames, buffer = 2 periods
nperiods = 2 for capture
nperiods = 2 for playback
JACK: unable to mlock() port buffers: Cannot allocate memory
jack_create_thread: error -1 switching current thread to rt for
inheritance: Unk nown error 4294967295
cannot start watchdog thread
cannot load driver module alsa
ardour: [ERROR]: Unable to connect to JACK server
ardour: [ERROR]: Could not connect to JACK server as "ardour"
ardour: [ERROR]: Could not connect to JACK server as "ardour"
[master-1@email-addr-hidden-1 ~]$
********************************************************************
Any help would be appreciated
Cheers
Bob
Received on Mon May 23 16:15:14 2005
This archive was generated by hypermail 2.1.8 : Mon May 23 2005 - 16:15:15 EEST