Kevin Sookocheff wrote:
> > Have a look at the amidi and/or aseqdump programs.
>
> listing devices (amidi -l) doesn't respond with any devices.
Then your MIDI port isn't recognized. Just to be sure: this is the
MIDI/gameport on the mainboard?
What ALSA version are you using? (see /proc/asound/version)
What kernel version? (uname -a)
What are the options you've set for the snd-mpu401 module? If ACPI is
enabled in both the BIOS and the kernel, it should be detected
automatically. Otherwise, you have to use something like
options snd-mpu401 pnp=0 port=0x330 irq=10
in your /etc/modprobe.conf or whatever your distribution uses (and the
port and interrupt numbers must be the same as those configures in the
BIOS setup).
HTH
Clemens
Received on Tue Aug 23 16:15:04 2005
This archive was generated by hypermail 2.1.8 : Tue Aug 23 2005 - 16:15:05 EEST