Hi Dave. Can't say I know anything about using pcmcia, but I just wondered if
you had the option lines set in /etc/modules.conf , and whether this may have
something to do with it.
options card_ID index=0
options card_ID index=1
options card_ID index=2
options snd-pdaudiocf index=3
obviously with the first 3's card ID's changed for your first 3 cards.
I say this because before I had the options set, my usb midi keyboard was
being detected first and registered in /proc/asound/cards , and the actual
soundcard wasn't there. All the best. Nigel.
J
On Wednesday 31 Aug 2005 1:38 pm, Dave Phillips wrote:
> Greetings:
>
> I've switched my laptop back to Planet C's RH9 and its 2.4.26 kernel.
> The machine is much happier now.
>
> However, a problem has come up that did not exist on a former
> identical installation: My PDAudioCF card is not recognized when I 'cat
> /proc/asound/cards'. lsmod shows this report:
>
> [dlphilp@email-addr-hidden dlphilp]$ lsmod |grep pdaudio
> snd-pdaudiocf 10980 0 (unused)
> snd-ak4117 7196 0 [snd-pdaudiocf]
> snd-pcm 85952 0 [snd-pcm-oss snd-pdaudiocf snd-ak4117
> snd-usb-audio snd-cs4231-lib]
> snd 48708 0 [snd-pcm-oss snd-mixer-oss
> snd-seq-dummy snd-seq-oss snd-seq-midi snd-opl3-synth snd-seq-instr
> snd-pdaudiocf snd-ak4117 snd-usb-audio snd-virmidi snd-seq-virmidi
> snd-seq-midi-event snd-seq snd-cs4232 snd-opl3-lib snd-hwdep
> snd-mpu401-uart snd-rawmidi snd-seq-device snd-cs4231-lib snd-pcm
> snd-timer] ds 8776 2 [snd-pdaudiocf serial_cs
> pcnet_cs] pcmcia_core 57504 0 [snd-pdaudiocf serial_cs
> pcnet_cs ds yenta_socket]
>
>
> But catting proc shows only:
>
> [dlphilp@email-addr-hidden dlphilp]$ cat /proc/asound/cards
> 0 [CS4231 ]: CS4231 - CS4231
> CS4231 at 0x534, irq 5, dma 1&0
> 1 [VirMIDI ]: VirMIDI - VirMIDI
> Virtual MIDI Card 1
> 2 [M2x2 ]: USB-Audio - Midisport 2x2
> Midiman Midisport 2x2 at usb-00:07.2-1.2, full speed
>
>
> I added these lines to /etc/modules.conf :
>
> alias snd-card-3 snd-pdaudiocf
> alias sound-slot-3 snd-pdaudiocf
>
> I also tried manually loading snd-pdaudiocf, it seemed to work all
> right and reported no error. Nevertheless, no PDAudioCF card appears in
> /proc/asound. The card's little blue light is on, indicating that the
> card is recognized by the PCMCIA system, but something else is wrong
> somewhere. Any suggestions ?
>
> Best,
>
> dp
Received on Wed Aug 31 20:15:06 2005
This archive was generated by hypermail 2.1.8 : Wed Aug 31 2005 - 20:15:06 EEST