Re: [linux-audio-user] Help: Audiotrak Maya 44 USB doesn't work

From: Markus Herhoffer <markus@email-addr-hidden>
Date: Sun Jan 01 2006 - 21:51:14 EET

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hello!

I have it working under Gentoo. The Maya 44 USB works with the module
"snd-usb-audio". But you should check the settings for your hotplugd. I
had the problem that hotplug tried to manage the soundcard but it was
not able to configure it properly. After disabeling this the card worked
perfectly.

CU
Markus

http://d135-1r43.de

Harri Tuomela wrote:
> Hi!
>
> I'm trying to get Audiotrak Maya 44 USB audio interface [1] working on
> Debian Sarge machine (alsa 1.0.8).
>
> When I plug in the device, the following messages are written into
> /var/log/kern.log:
>
> usb 1-2: new full speed USB device using address 9
> snd-usb-audio: probe of 1-2:1.0 failed with error -5
> hiddev96: USB HID v1.00 Device [AUDIOTRAK MAYA44 USB] on usb-0000:00:1d.0-2
>
> /proc/bus/usb/devices:
>
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
> D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> P: Vendor=0a92 ProdID=0091 Rev= 1.00
> S: Manufacturer=AUDIOTRAK
> S: Product=MAYA44 USB
> C:* #Ifs= 4 Cfg#= 1 Atr=00 MxPwr=250mA
> I: If#= 0 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=(none)
> I: If#= 1 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
> I: If#= 1 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
> E: Ad=01(O) Atr=09(Isoc) MxPS= 384 Ivl=1ms
> I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
> I: If#= 2 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio
> E: Ad=82(I) Atr=0d(Isoc) MxPS= 384 Ivl=1ms
> I: If#= 3 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
> E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=16ms
>
> The interface is not found by alsa. Only machine's built-in audio chip
> is in /proc/asound/cards:
>
> 0 [I82801DBICH4 ]: ICH - Intel 82801DB-ICH4
> Intel 82801DB-ICH4 at 0xa0100000, irq 11
>
> Actually, alsaconf does not find the device either.
>
> What's wrong? Someone else has definetly got it working somehow [2].
>
> -Harri
>
> [1] http://www.audiotrak.net/maya44usb.htm
> [2] http://elists.resynthesize.com/linux-audio-users/2005/01/1312611/

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org

iD8DBQFDuDKy4ihw6BWdedERAv7jAJ0VXYRIR46M3eJLmtfcqErJDhgVFwCgwxOD
1TMf6LuenlP/sqRkaPDomYQ=
=V0jp
-----END PGP SIGNATURE-----
Received on Mon Jan 2 00:15:04 2006

This archive was generated by hypermail 2.1.8 : Mon Jan 02 2006 - 00:15:05 EET