On Mon, 23 Jan 2006, Cesare Marilungo wrote:
> In Rosegarden open the dialog in composition->studio->manage MIDI
> devices and check if your midi device is listed into 'Play devices'.
Listed and selected as the "MIDI output system device".
> Then, in the main sequencer editor, right click on the channel you
> want to play and select that device.
Done. All tracks unmuted (just to be sure); no output from MIDI jack.
I use an LED soldered to a DIN-5 socket as a tester, and aplaymidi
produces the expected type of LED blinking if I use it to "play" a
MIDI file. This confirms to me (I believe) that both the hardware and
the OS level support are functioning properly. If there's something
else I can do to provide additional confirmation whether that's true,
I hope someone will suggest it.
> Hope this helps,
I'm seriously wondering about the fact that Rosegarden does not show up in
JACK's MIDI "readable clients / output ports" list, and would appreciate
confirmation of whether I should be expecting to see it listed there.
-- ---------------------------------------------------------------------- Sylvain Robitaille syl@email-addr-hidden Major in Electroacoustic Studies Concordia University Faculty of Fine Arts / Music Department Montreal, Quebec, Canada ----------------------------------------------------------------------Received on Tue Jan 24 20:15:10 2006
This archive was generated by hypermail 2.1.8 : Tue Jan 24 2006 - 20:15:11 EET