Hallo,
I amm on a debian sarge gnome desktop. I have an
on-board sis/ac97 chip.
This week I downloaded kernel 2.6.15.1 and installed sound etc.
as modules
since I wanted to include a webcam. Sound has not been tested
before. When
booting the new kernel, alsa sound seems to be enabled since the
modules
are loaded. However, when I try e.g. xmms than I get the message
(translated by myself)
please check that the soundcard is installed properly, that the
correct
plug-ins are chosen, and that no other program blocks sound.
The situation is bizarre:
When I shutdown gnome and move to the terminal and run alsaconf,
the card
is found and enabled. After restarting gnome sound works, no
program
blocks the card. This demonstrates that things are properly
installed,
modules available, permissions granted etc.
What do I have to do to make sound start correctly at boottime?
The alsa
settings should be saved during shutdown and reloaded at
boottime. How can
I control that the correct alsa settings are loaded, what file
is the
relevant one?
I am working with the original debian sarge versions (as of juli
2005).
Included is the lsmod output after booting
Any help is very much appreciated
Any help is appreciated
Bernhard
Syslog shows :
ALSA sound/core/init.c:132: cannot find the slot for index 0
(range 0-0)
lspci:
lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 746
Host (rev 02)
0000:00:01.0 PCI bridge: Silicon Integrated Systems [SiS]
SG86C202
0000:00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963
[MuTIOL Media IO] (rev 25)
0000:00:02.1 SMBus: Silicon Integrated Systems [SiS]: Unknown
device 0016
0000:00:02.5 IDE interface: Silicon Integrated Systems [SiS]
5513 [IDE]
0000:00:02.7 Multimedia audio controller: Silicon Integrated
Systems [SiS] Sound Controller (rev a0)
0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS]
USB 1.0 Controller (rev 0f)
0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS]
USB 1.0 Controller (rev 0f)
0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS]
USB 2.0 Controller
0000:00:0a.0 SCSI storage controller: Adaptec AHA-2940/2940W /
AIC-7871
0000:00:0b.0 Ethernet controller: Intel Corp. 82557/8/9
[Ethernet Pro 100] (rev 0c)
0000:00:0c.0 Network controller: AVM Audiovisuelles MKTG &
Computer System GmbH Fritz!PCI v2.0 ISDN (rev 01)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc
Radeon RV100 QY [Radeon 7000/VE]
lsmod:
lsmod
Module Size Used by
ppp_deflate 6656 0
zlib_deflate 20504 1 ppp_deflate
bsd_comp 6400 0
ppp_synctty 9984 0
radeon 110624 2
binfmt_misc 11784 1
ehci_hcd 33288 0
snd_intel8x0 34844 0
snd_ac97_codec 98208 1 snd_intel8x0
snd_ac97_bus 2560 1 snd_ac97_codec
i2c_sis96x 6788 0
sn9c102 95244 0
videodev 9600 1 sn9c102
v4l2_common 8064 1 sn9c102
snd_usb_audio 84544 1
snd_pcm 100744 3
snd_intel8x0,snd_ac97_codec,snd_usb_audio
snd_timer 26500 1 snd_pcm
snd_page_alloc 11912 2 snd_intel8x0,snd_pcm
snd_usb_lib 18176 1 snd_usb_audio
snd_rawmidi 27168 1 snd_usb_lib
snd_seq_device 9484 1 snd_rawmidi
snd_hwdep 10628 1 snd_usb_audio
snd 60516 11
snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm,snd_timer,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hwdep
soundcore 10208 1 snd
ohci_hcd 20996 0
usbcore 134020 6
ehci_hcd,sn9c102,snd_usb_audio,snd_usb_lib,ohci_hcd
This archive was generated by hypermail 2.1.8 : Tue Feb 07 2006 - 16:15:04 EET