Julian Squires wrote:
> "Dan Easley" <daneasley@email-addr-hidden> writes:
>> MIDI did work but now doesn't. It shows up in QJackCtl's window, but
>> no MIDI signals are passed through; even more telling, the MIDI IN LED
>> on the unit doesn't light. I've tested the controller with a BCR2000
>> and it works fine; have also tried another controller with the Tascam.
>> Again, the ports are apparently recognized by ALSA - in addition,
>> audio works fine. I'm guessing it's a hardware failure of the Tascam,
>> and I'll need to replace the unit, but I wanted to ask if you all can
>> think of anything else linux-related I'm not thinking of.
>
> I use a Tascam US-122 on various Linux/PPC machines, and I've had this
> happen before. I wish I could say exactly what it is, but I'm pretty
> sure it's a software misconfiguration. I think each time, it must have
> been caused by upgrades I did, but I never paid sufficiently close
> attention, alas. Check whether you have the usb-midi kernel module
> loaded (in addition to all the usx2y stuff), et cetera.
>
> Hope this helps.
>
This seems to be a known issue on alsa-driver, that crept around version
1.0.9. It was fixed since 1.0.9b. Check it out.
Cheers.
-- rncbc aka Rui Nuno Capela rncbc@email-addr-hiddenReceived on Fri Apr 7 20:15:04 2006
This archive was generated by hypermail 2.1.8 : Fri Apr 07 2006 - 20:15:04 EEST