Esa Linna schreef:
> amidi -l says:
>
> Device Name
> hw:0,0 Audigy MPU-401 (UART)
> hw:0,1 Audigy MPU-401 #2
> hw:0,2 Emu10k1 Synth MIDI (16 subdevices)
> hw:0,3 Emu10k1 Synth MIDI (16 subdevices)
>
> aconnect -io:
>
> client 0: 'System' [type=kernel]
> 0 'Timer '
> 1 'Announce '
> client 16: 'Audigy MPU-401 #2' [type=kernel]
> 0 'Audigy MPU-401 (UART)'
> 32 'Audigy MPU-401 #2'
> client 17: 'Emu10k1 WaveTable' [type=kernel]
> 0 'Emu10k1 Port 0 '
> 1 'Emu10k1 Port 1 '
> 2 'Emu10k1 Port 2 '
> 3 'Emu10k1 Port 3 '
>
> I tried with all ports (hw:0,0 - hw:0,4) this command:
> amidi -p hw:0,0 -d
>
> but nothing when I press the keys.
>
> Maybe I should try Edirol *UM-1EX or some other cheap USB solution.*
> **
>
Just a few thoughts:
Do you have a soundfont loaded on the Audigy?
Is the synth-knob active in the mixer and is the slider up?
Have you tried toggling the analog/digital output in the mixer (if it's
there)?
Can you send midi data the other way, i.e from computer to the PSR?
Hope any of this helps,
Regards,
Bert
Received on Sat Apr 29 04:15:02 2006
This archive was generated by hypermail 2.1.8 : Sat Apr 29 2006 - 04:15:02 EEST