On Tue, Sep 05, 2006 at 12:57:51AM +0000, Cesare Marilungo wrote:
> After more than a year of using this device, I've found that I cannot
> run it at 48KHz, or 96KHz.
> ...
> Doesn't snd-usb-audio support higher sample rates for this device?
> Reading the source code I guess it should, but it isn't working here.
I have an UA-2 which is similar, and it works perfectly at 48 and 96 kHz.
In fact it works a lot better (much lower latency possible) at these
rates than at 44.1 kHz.
For the UA-2, if you change the sample frequency or mode, this involves
setting a hardware switch on the device, and then restarting snd-usb-audio
by a 'modprobe snd-usb-audio'.
-- FA Lascia la spina, cogli la rosa.Received on Tue Sep 5 16:15:09 2006
This archive was generated by hypermail 2.1.8 : Tue Sep 05 2006 - 16:15:09 EEST