Does it show up correctly in Kmix or another mixer?
You say the SB is hw:0 and it looks like you are trying to setup jack for hw:2... what does it detect as hw:1?
Are you running a distro that has alsaconf available?
Until recently I ran a Delta 44 in combination with my onboard soundchip and never had a problem with them playing together although it seems to me that jack found the '44 as hw:1. Motherboard had PCI slots go flaky so I can't verify that until I get a new board :(
Best,
Jon Hoskins
Carotinho <carotinobg@email-addr-hidden> wrote: Hi all!
I've just bough a Delta 44 but I can't run it.
I've installed it properly, and the modules get loaded. But I'm scratching my
head as I cannot get Jack to work with it.
The message is
loading driver ..
apparent rate = 48000
creating alsa driver ... hw:2,0|hw:2,0|128|2|48000|4|4|nomon|swmeter|-|32bit
control device hw:2
configuring for 48000Hz, period = 128 frames, buffer = 2 periods
ALSA: final selected sample format for capture: 32bit little-endian
ALSA: cannot set channel count to 4 for capture
ALSA: cannot configure capture channel
cannot load driver module alsa
and I get errors with every channel count number, sample rates, etc.
I've a SBLive installed, which takes hw:0.
Did someone of you incurred in the same problem and found a solution?
Thanks in advance!
Carotinho
Chiacchiera con i tuoi amici in tempo reale!
http://it.yahoo.com/mail_it/foot/*http://it.messenger.yahoo.com
-----------------------------------------------------------------------
In a world without walls who needs gates or windows?
--unknown
---------------------------------
Any questions? Get answers on any topic at Yahoo! Answers. Try it now.
Received on Tue Dec 12 00:15:16 2006
This archive was generated by hypermail 2.1.8 : Tue Dec 12 2006 - 00:15:16 EET