--- linux-2.6.19-rc6/drivers/ata/Kconfig 2006-11-15 20:03:40.000000000 -0800 +++ devel/drivers/ata/Kconfig 2006-11-28 01:39:23.000000000 -0800 @@ -328,6 +341,15 @@ config PATA_TRIFLEX If unsure, say N. +config PATA_MARVELL + tristate "Marvell PATA support via legacy mode" + depends on PCI + help + This option enables limited support for the Marvell 88SE6145 ATA + controller. + + If unsure, say N. + config PATA_MPIIX tristate "Intel PATA MPIIX support" depends on PCI --- linux-2.6.19-rc6/drivers/ata/Makefile 2006-11-15 20:03:40.000000000 -0800 +++ devel/drivers/ata/Makefile 2006-11-28 01:39:23.000000000 -0800 @@ -38,6 +38,7 @@ obj-$(CONFIG_PATA_NETCELL) += pata_netce obj-$(CONFIG_PATA_NS87410) += pata_ns87410.o obj-$(CONFIG_PATA_OPTI) += pata_opti.o obj-$(CONFIG_PATA_OPTIDMA) += pata_optidma.o +obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o --- /dev/null 2006-11-23 13:22:12.306755250 -0800 +++ devel/drivers/ata/pata_marvell.c 2006-11-28 01:39:25.000000000 -0800 @@ -0,0 +1,224 @@ +/* + * Marvell PATA driver. + * + * For the moment we drive the PATA port in legacy mode. That + * isn't making full use of the device functionality but it is + * easy to get working. + * + * (c) 2006 Red Hat + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_marvell" +#define DRV_VERSION "0.1.1" + +/** + * marvell_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform the PATA port setup we need. + */ + +static int marvell_pre_reset(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u32 devices; + void __iomem *barp; + int i; + + /* Check if our port is enabled */ + + barp = pci_iomap(pdev, 5, 0x10); + if (barp == NULL) + return -ENOMEM; + printk("BAR5:"); + for(i = 0; i <= 0x0F; i++) + printk("%02X:%02X ", i, readb(barp + i)); + printk("\n"); + + devices = readl(barp + 0x0C); + pci_iounmap(pdev, barp); + + if ((pdev->device == 0x6145) && (ap->port_no == 0) && + (!(devices & 0x10))) /* PATA enable ? */ + return -ENOENT; + + /* Cable type */ + switch(ap->port_no) + { + case 0: + if (inb(ap->ioaddr.bmdma_addr + 1) & 1) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + break; + + case 1: /* Legacy SATA port */ + ap->cbl = ATA_CBL_SATA; + break; + } + return ata_std_prereset(ap); +} + +/** + * marvell_error_handler - Setup and error handler + * @ap: Port to handle + * + * LOCKING: + * None (inherited from caller). + */ + +static void marvell_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, marvell_pre_reset, ata_std_softreset, + NULL, ata_std_postreset); +} + +/* No PIO or DMA methods needed for this device */ + +static struct scsi_host_template marvell_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + /* Use standard CHS mapping rules */ + .bios_param = ata_std_bios_param, + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, +}; + +static const struct ata_port_operations marvell_ops = { + .port_disable = ata_port_disable, + + /* Task file is PCI ATA format, use helpers */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = marvell_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + /* BMDMA handling is PCI ATA format, use helpers */ + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + /* Timeout handling */ + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + /* Generic PATA PCI ATA helpers */ + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * marvell_init_one - Register Marvell ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in marvell_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *id) +{ + static struct ata_port_info info = { + .sht = &marvell_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x3f, + + .port_ops = &marvell_ops, + }; + static struct ata_port_info info_sata = { + .sht = &marvell_sht, + /* Slave possible as its magically mapped not real */ + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + + .port_ops = &marvell_ops, + }; + struct ata_port_info *port_info[2] = { &info, &info_sata }; + int n_port = 2; + + if (pdev->device == 0x6101) + n_port = 1; + + return ata_pci_init_one(pdev, port_info, n_port); +} + +static const struct pci_device_id marvell_pci_tbl[] = { + { PCI_DEVICE(0x11AB, 0x6101), }, + { PCI_DEVICE(0x11AB, 0x6145), }, + { } /* terminate list */ +}; + +static struct pci_driver marvell_pci_driver = { + .name = DRV_NAME, + .id_table = marvell_pci_tbl, + .probe = marvell_init_one, + .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +}; + +static int __init marvell_init(void) +{ + return pci_register_driver(&marvell_pci_driver); +} + +static void __exit marvell_exit(void) +{ + pci_unregister_driver(&marvell_pci_driver); +} + +module_init(marvell_init); +module_exit(marvell_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Marvell ATA in legacy mode"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, marvell_pci_tbl); +MODULE_VERSION(DRV_VERSION); +